Publish App
POST
https://api.datadoghq.com/api/v2/app-builder/apps/{app_id}/deploymenthttps://api.us3.datadoghq.com/api/v2/app-builder/apps/{app_id}/deploymenthttps://api.us5.datadoghq.com/api/v2/app-builder/apps/{app_id}/deploymenthttps://api.datadoghq.eu/api/v2/app-builder/apps/{app_id}/deploymenthttps://api.ap1.datadoghq.com/api/v2/app-builder/apps/{app_id}/deploymenthttps://api.ap2.datadoghq.com/api/v2/app-builder/apps/{app_id}/deploymenthttps://api.uk1.datadoghq.com/api/v2/app-builder/apps/{app_id}/deploymenthttps://api.ddog-gov.com/api/v2/app-builder/apps/{app_id}/deploymenthttps://api.us2.ddog-gov.com/api/v2/app-builder/apps/{app_id}/deploymentOverview
Publish an app for use by other users. To ensure the app is accessible to the correct users, you also need to set a Restriction Policy on the app if a policy does not yet exist. This API requires a registered application key. Alternatively, you can configure these permissions in the UI.
Arguments
Path Parameters
Name
Type
Description
app_id [required]string
The ID of the app to publish.
Response
Created
The response object after an app is successfully published.
Field
Type
Description
dataobject
The version of the app that was published.
attributesobject
The attributes object containing the version ID of the published app.
app_version_iduuid
The version ID of the app that was published. For an unpublished app, this is always the nil UUID (00000000-0000-0000-0000-000000000000).
iduuid
The deployment ID.
metaobject
Metadata object containing the publication creation information.
created_atdate-time
Timestamp of when the app was published.
user_idint64
The ID of the user who published the app.
user_namestring
The name (or email address) of the user who published the app.
user_uuiduuid
The UUID of the user who published the app.
typeenum
The deployment type.
deploymentAllowed enum values:
deployment{
"data": {
"attributes": {
"app_version_id": "65bb1f25-52e1-4510-9f8d-22d1516ed693"
},
"id": "65bb1f25-52e1-4510-9f8d-22d1516ed693",
"meta": {
"created_at": "2019-09-19T10:00:00.000Z",
"user_id": "integer",
"user_name": "string",
"user_uuid": "65bb1f25-52e1-4510-9f8d-22d1516ed693"
},
"type": "deployment"
}
}Bad Request
API error response.
Field
Type
Description
errors [required][object]
A list of errors.
detailstring
A human-readable explanation specific to this occurrence of the error.
metaobject
Non-standard meta-information about the error
sourceobject
References to the source of the error.
headerstring
A string indicating the name of a single request header which caused the error.
parameterstring
A string indicating which URI query parameter caused the error.
pointerstring
A JSON pointer to the value in the request document that caused the error.
statusstring
Status code of the response.
titlestring
Short human-readable summary of the error.
{
"errors": [
{
"detail": "Missing required attribute in body",
"meta": {},
"source": {
"header": "Authorization",
"parameter": "limit",
"pointer": "/data/attributes/title"
},
"status": "400",
"title": "Bad Request"
}
]
}Forbidden
API error response.
Field
Type
Description
errors [required][object]
A list of errors.
detailstring
A human-readable explanation specific to this occurrence of the error.
metaobject
Non-standard meta-information about the error
sourceobject
References to the source of the error.
headerstring
A string indicating the name of a single request header which caused the error.
parameterstring
A string indicating which URI query parameter caused the error.
pointerstring
A JSON pointer to the value in the request document that caused the error.
statusstring
Status code of the response.
titlestring
Short human-readable summary of the error.
{
"errors": [
{
"detail": "Missing required attribute in body",
"meta": {},
"source": {
"header": "Authorization",
"parameter": "limit",
"pointer": "/data/attributes/title"
},
"status": "400",
"title": "Bad Request"
}
]
}Not Found
API error response.
Field
Type
Description
errors [required][object]
A list of errors.
detailstring
A human-readable explanation specific to this occurrence of the error.
metaobject
Non-standard meta-information about the error
sourceobject
References to the source of the error.
headerstring
A string indicating the name of a single request header which caused the error.
parameterstring
A string indicating which URI query parameter caused the error.
pointerstring
A JSON pointer to the value in the request document that caused the error.
statusstring
Status code of the response.
titlestring
Short human-readable summary of the error.
{
"errors": [
{
"detail": "Missing required attribute in body",
"meta": {},
"source": {
"header": "Authorization",
"parameter": "limit",
"pointer": "/data/attributes/title"
},
"status": "400",
"title": "Bad Request"
}
]
}Too many requests
API error response.
Field
Type
Description
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Code Example
Publish App
# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export app_id="65bb1f25-52e1-4510-9f8d-22d1516ed693"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/app-builder/apps/${app_id}/deployment" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"Publish App
// Publish App returns "Created" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
"github.com/google/uuid"
)
func main() {
// there is a valid "app" in the system
AppDataID := uuid.MustParse(os.Getenv("APP_DATA_ID"))
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewAppBuilderApi(apiClient)
resp, r, err := api.PublishApp(ctx, AppDataID)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `AppBuilderApi.PublishApp`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `AppBuilderApi.PublishApp`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"Publish App
// Publish App returns "Created" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.AppBuilderApi;
import com.datadog.api.client.v2.model.PublishAppResponse;
import java.util.UUID;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
AppBuilderApi apiInstance = new AppBuilderApi(defaultClient);
// there is a valid "app" in the system
UUID APP_DATA_ID = null;
try {
APP_DATA_ID = UUID.fromString(System.getenv("APP_DATA_ID"));
} catch (IllegalArgumentException e) {
System.err.println("Error parsing UUID: " + e.getMessage());
}
try {
PublishAppResponse result = apiInstance.publishApp(APP_DATA_ID);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling AppBuilderApi#publishApp");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"Publish App
"""
Publish App returns "Created" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.app_builder_api import AppBuilderApi
# there is a valid "app" in the system
APP_DATA_ID = environ["APP_DATA_ID"]
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = AppBuilderApi(api_client)
response = api_instance.publish_app(
app_id=APP_DATA_ID,
)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"Publish App
# Publish App returns "Created" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::AppBuilderAPI.new
# there is a valid "app" in the system
APP_DATA_ID = ENV["APP_DATA_ID"]
p api_instance.publish_app(APP_DATA_ID)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"Publish App
// Publish App returns "Created" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_app_builder::AppBuilderAPI;
#[tokio::main]
async fn main() {
// there is a valid "app" in the system
let app_data_id =
uuid::Uuid::parse_str(&std::env::var("APP_DATA_ID").unwrap()).expect("Invalid UUID");
let configuration = datadog::Configuration::new();
let api = AppBuilderAPI::with_config(configuration);
let resp = api.publish_app(app_data_id.clone()).await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runPublish App
/**
* Publish App returns "Created" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.AppBuilderApi(configuration);
// there is a valid "app" in the system
const APP_DATA_ID = process.env.APP_DATA_ID as string;
const params: v2.AppBuilderApiPublishAppRequest = {
appId: APP_DATA_ID,
};
apiInstance
.publishApp(params)
.then((data: v2.PublishAppResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"