Get experiment diagnostics - Experiments

GEThttps://api.datadoghq.com/api/v2/experiments/{experiment_id}/diagnosticshttps://api.us3.datadoghq.com/api/v2/experiments/{experiment_id}/diagnosticshttps://api.us5.datadoghq.com/api/v2/experiments/{experiment_id}/diagnosticshttps://api.datadoghq.eu/api/v2/experiments/{experiment_id}/diagnosticshttps://api.ap1.datadoghq.com/api/v2/experiments/{experiment_id}/diagnosticshttps://api.ap2.datadoghq.com/api/v2/experiments/{experiment_id}/diagnosticshttps://api.uk1.datadoghq.com/api/v2/experiments/{experiment_id}/diagnosticshttps://api.ddog-gov.com/api/v2/experiments/{experiment_id}/diagnosticshttps://api.us2.ddog-gov.com/api/v2/experiments/{experiment_id}/diagnostics

Descripción general

Get the diagnostics produced by an experiment's latest analysis run. Each diagnostic includes its category, and the response includes an overall diagnostic or pipeline lifecycle status.

This endpoint requires the product_analytics_experiments_read permission.

OAuth apps require the product_analytics_experiments_read authorization scope to access this endpoint.

Argumentos

Parámetros de ruta

Nombre

Type

Descripción

experiment_id [required]

string

The UUID of the experiment.

Respuesta

Response containing the diagnostic checks for an experiment.

Campo

Type

Descripción

data [required]

object

Experiment diagnostics resource with its identifier and check results.

{
  "data": {
    "attributes": {
      "diagnostics": [
        {
          "message": "string",
          "metric_id": "string",
          "skipped_reason": "string",
          "status": "PASS",
          "title": "title",
          "type": "EXPERIMENT_HAS_ASSIGNMENTS"
        }
      ],
      "evaluated_at": "2019-09-19T10:00:00.000Z",
      "result": "string",
      "state": "NOT_STARTED"
    },
    "id": "550e8400-e29b-41d4-a716-446655440000",
    "type": "experiment-diagnostics"
  }
}

Malformed experiment ID (not a valid UUID).

API error response.

Campo

Type

Descripción

errors [required]

[object]

A list of errors.

{
  "errors": [
    {
      "detail": "Missing required attribute in body",
      "meta": {},
      "source": {
        "header": "Authorization",
        "parameter": "limit",
        "pointer": "/data/attributes/title"
      },
      "status": "400",
      "title": "Bad Request"
    }
  ]
}

Missing or invalid authentication.

API error response.

Campo

Type

Descripción

errors [required]

[object]

A list of errors.

{
  "errors": [
    {
      "detail": "Missing required attribute in body",
      "meta": {},
      "source": {
        "header": "Authorization",
        "parameter": "limit",
        "pointer": "/data/attributes/title"
      },
      "status": "400",
      "title": "Bad Request"
    }
  ]
}

Authenticated caller lacks the product_analytics_experiments_read permission.

API error response.

Campo

Type

Descripción

errors [required]

[object]

A list of errors.

{
  "errors": [
    {
      "detail": "Missing required attribute in body",
      "meta": {},
      "source": {
        "header": "Authorization",
        "parameter": "limit",
        "pointer": "/data/attributes/title"
      },
      "status": "400",
      "title": "Bad Request"
    }
  ]
}

No experiment with this ID exists for the organization. Lifecycle statuses in a successful response explain whether analysis has started, is running, or completed without diagnostics.

API error response.

Campo

Type

Descripción

errors [required]

[object]

A list of errors.

{
  "errors": [
    {
      "detail": "Missing required attribute in body",
      "meta": {},
      "source": {
        "header": "Authorization",
        "parameter": "limit",
        "pointer": "/data/attributes/title"
      },
      "status": "400",
      "title": "Bad Request"
    }
  ]
}

Too many requests

API error response.

Campo

Type

Descripción

errors [required]

[string]

A list of errors.

{
  "errors": [
    "Bad Request"
  ]
}

Ejemplo de código

Get experiment diagnostics

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Path parameters
export experiment_id="550e8400-e29b-41d4-a716-446655440000"

# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/experiments/${experiment_id}/diagnostics" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

Get experiment diagnostics

// Get experiment diagnostics returns "OK" response

package main

import (
	"context"
	"encoding/json"
	"fmt"
	"os"

	"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
	"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
	"github.com/google/uuid"
)

func main() {
	// there is a valid "experiment" in the system
	ExperimentDataID := uuid.MustParse(os.Getenv("EXPERIMENT_DATA_ID"))

	ctx := datadog.NewDefaultContext(context.Background())
	ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
	configuration := datadog.NewConfiguration()
	apiClient := datadog.NewAPIClient(configuration)
	api := datadogV2.NewExperimentsApi(apiClient)
	resp, r, err := api.GetExperimentDiagnostics(ctx, ExperimentDataID)

	if err != nil {
		fmt.Fprintf(os.Stderr, "Error when calling `ExperimentsApi.GetExperimentDiagnostics`: %v\n", err)
		fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
	}

	responseContent, _ := json.MarshalIndent(resp, "", "  ")
	fmt.Fprintf(os.Stdout, "Response from `ExperimentsApi.GetExperimentDiagnostics`:\n%s\n", responseContent)
}

Instructions

First install the library and its dependencies and then save the example to main.go and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

Get experiment diagnostics

// Get experiment diagnostics returns "OK" response

import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.ExperimentsApi;
import com.datadog.api.client.v2.model.ExperimentsExperimentDiagnosticsV2DTO;
import java.util.UUID;

public class Example {
  public static void main(String[] args) {
    ApiClient defaultClient = ApiClient.getDefaultApiClient();
    defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
    ExperimentsApi apiInstance = new ExperimentsApi(defaultClient);

    // there is a valid "experiment" in the system
    UUID EXPERIMENT_DATA_ID = null;
    try {
      EXPERIMENT_DATA_ID = UUID.fromString(System.getenv("EXPERIMENT_DATA_ID"));
    } catch (IllegalArgumentException e) {
      System.err.println("Error parsing UUID: " + e.getMessage());
    }

    try {
      ExperimentsExperimentDiagnosticsV2DTO result =
          apiInstance.getExperimentDiagnostics(EXPERIMENT_DATA_ID);
      System.out.println(result);
    } catch (ApiException e) {
      System.err.println("Exception when calling ExperimentsApi#getExperimentDiagnostics");
      System.err.println("Status code: " + e.getCode());
      System.err.println("Reason: " + e.getResponseBody());
      System.err.println("Response headers: " + e.getResponseHeaders());
      e.printStackTrace();
    }
  }
}

Instructions

First install the library and its dependencies and then save the example to Example.java and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

Get experiment diagnostics

"""
Get experiment diagnostics returns "OK" response
"""

from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.experiments_api import ExperimentsApi

# there is a valid "experiment" in the system
EXPERIMENT_DATA_ID = environ["EXPERIMENT_DATA_ID"]

configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
    api_instance = ExperimentsApi(api_client)
    response = api_instance.get_experiment_diagnostics(
        experiment_id=EXPERIMENT_DATA_ID,
    )

    print(response)

Instructions

First install the library and its dependencies and then save the example to example.py and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

Get experiment diagnostics

# Get experiment diagnostics returns "OK" response

require "datadog_api_client"
DatadogAPIClient.configure do |config|
  config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::ExperimentsAPI.new

# there is a valid "experiment" in the system
EXPERIMENT_DATA_ID = ENV["EXPERIMENT_DATA_ID"]
p api_instance.get_experiment_diagnostics(EXPERIMENT_DATA_ID)

Instructions

First install the library and its dependencies and then save the example to example.rb and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

Get experiment diagnostics

// Get experiment diagnostics returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_experiments::ExperimentsAPI;

#[tokio::main]
async fn main() {
    // there is a valid "experiment" in the system
    let experiment_data_id =
        uuid::Uuid::parse_str(&std::env::var("EXPERIMENT_DATA_ID").unwrap()).expect("Invalid UUID");
    let configuration = datadog::Configuration::new();
    let api = ExperimentsAPI::with_config(configuration);
    let resp = api
        .get_experiment_diagnostics(experiment_data_id.clone())
        .await;
    if let Ok(value) = resp {
        println!("{:#?}", value);
    } else {
        println!("{:#?}", resp.unwrap_err());
    }
}

Instructions

First install the library and its dependencies and then save the example to src/main.rs and run following commands:

DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run