Enviar métricas
POST
https://api.datadoghq.com/api/v2/serieshttps://api.us3.datadoghq.com/api/v2/serieshttps://api.us5.datadoghq.com/api/v2/serieshttps://api.datadoghq.eu/api/v2/serieshttps://api.ap1.datadoghq.com/api/v2/serieshttps://api.ap2.datadoghq.com/api/v2/serieshttps://api.uk1.datadoghq.com/api/v2/serieshttps://api.ddog-gov.com/api/v2/serieshttps://api.us2.ddog-gov.com/api/v2/seriesDescripción general
El endpoint de métricas te permite publicar datos de cronologías que pueden representarse mediante gráficos en los dashboards de Datadog. El tamaño de carga útil máximo es de 500 kilobytes (512 000 bytes). Si la carga útil se comprime, debe ocupar menos de 5 megabytes (5 242 880 bytes) una vez descomprimida.
Si vas a enviar métricas directamente a la API de Datadog sin usar DogStatsD, ten en cuenta estos datos:
- Marca de tiempo: 64 bits
- Valor: 64 bits
- Nombres de métrica: 20 bytes
- Cronología: 50 bytes
- Carga útil total: 100 bytes aproximadamente
El nombre del host se incluye entre los recursos del campo “Recursos”.
Argumentos
Parámetros de encabezado
Nombre
Type
Descripción
Content-Encodingenum
HTTP header used to compress the media-type.
deflateAllowed enum values:
deflate, zstd1, gzipSolicitud
Body Data (required)
Campo
Type
Descripción
series [required][object]
Carga útil de las métricas.
intervalint64
If the type of the metric is rate or count, define the corresponding interval in seconds.
metadataobject
Metadata for the metric.
originobject
Metric origin information.
metric_typeint32
The origin metric type code
0productint32
The origin product code
0serviceint32
The origin service code
0metric [required]string
The name of the timeseries.
points [required][object]
Points relating to a metric. All points must be objects with timestamp and a scalar value (cannot be a string). Timestamps should be in POSIX time in seconds, and cannot be more than ten minutes in the future or more than one hour in the past.
timestampint64
The timestamp should be in seconds and current. Current is defined as not more than 10 minutes in the future or more than 1 hour in the past.
valuedouble
The numeric value format should be a 64bit float gauge-type value.
resources[object]
A list of resources to associate with this metric.
namestring
The name of the resource.
typestring
The type of the resource.
source_type_namestring
The source type name.
tags[string]
A list of tags associated with the metric.
typeenum
The type of metric. The available types are 0 (unspecified), 1 (count), 2 (rate), and 3 (gauge).
Allowed enum values:
0, 1, 2, 3unitstring
The unit of point value.
Submit metrics returns "Payload accepted" response
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}Submit metrics with compression returns "Payload accepted" response
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}Respuesta
Payload accepted
The payload accepted for intake.
Campo
Type
Descripción
errors[string]
A list of errors.
{
"errors": []
}Bad Request
API error response.
Campo
Type
Descripción
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Authentication error
API error response.
Campo
Type
Descripción
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Request timeout
API error response.
Campo
Type
Descripción
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Payload too large
API error response.
Campo
Type
Descripción
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
Campo
Type
Descripción
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Ejemplo de código
Submit metrics returns "Payload accepted" response
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
],
"resources": [
{
"name": "dummyhost",
"type": "host"
}
]
}
]
}
EOFSubmit metrics with compression returns "Payload accepted" response
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": 0,
"points": [
{
"timestamp": 1636629071,
"value": 0.7
}
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v2/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-Submit metrics returns "Payload accepted" response
// Submit metrics returns "Payload accepted" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"time"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
body := datadogV2.MetricPayload{
Series: []datadogV2.MetricSeries{
{
Metric: "system.load.1",
Type: datadogV2.METRICINTAKETYPE_UNSPECIFIED.Ptr(),
Points: []datadogV2.MetricPoint{
{
Timestamp: datadog.PtrInt64(time.Now().Unix()),
Value: datadog.PtrFloat64(0.7),
},
},
Resources: []datadogV2.MetricResource{
{
Name: datadog.PtrString("dummyhost"),
Type: datadog.PtrString("host"),
},
},
},
},
}
ctx := datadog.NewDefaultContext(context.Background())
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewMetricsApi(apiClient)
resp, r, err := api.SubmitMetrics(ctx, body, *datadogV2.NewSubmitMetricsOptionalParameters())
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `MetricsApi.SubmitMetrics`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `MetricsApi.SubmitMetrics`:\n%s\n", responseContent)
}
Submit metrics with compression returns "Payload accepted" response
// Submit metrics with compression returns "Payload accepted" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"time"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
body := datadogV2.MetricPayload{
Series: []datadogV2.MetricSeries{
{
Metric: "system.load.1",
Type: datadogV2.METRICINTAKETYPE_UNSPECIFIED.Ptr(),
Points: []datadogV2.MetricPoint{
{
Timestamp: datadog.PtrInt64(time.Now().Unix()),
Value: datadog.PtrFloat64(0.7),
},
},
},
},
}
ctx := datadog.NewDefaultContext(context.Background())
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewMetricsApi(apiClient)
resp, r, err := api.SubmitMetrics(ctx, body, *datadogV2.NewSubmitMetricsOptionalParameters().WithContentEncoding(datadogV2.METRICCONTENTENCODING_ZSTD1))
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `MetricsApi.SubmitMetrics`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `MetricsApi.SubmitMetrics`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"Submit metrics returns "Payload accepted" response
// Submit metrics returns "Payload accepted" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.MetricsApi;
import com.datadog.api.client.v2.model.IntakePayloadAccepted;
import com.datadog.api.client.v2.model.MetricIntakeType;
import com.datadog.api.client.v2.model.MetricPayload;
import com.datadog.api.client.v2.model.MetricPoint;
import com.datadog.api.client.v2.model.MetricResource;
import com.datadog.api.client.v2.model.MetricSeries;
import java.time.OffsetDateTime;
import java.util.Collections;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
MetricsApi apiInstance = new MetricsApi(defaultClient);
MetricPayload body =
new MetricPayload()
.series(
Collections.singletonList(
new MetricSeries()
.metric("system.load.1")
.type(MetricIntakeType.UNSPECIFIED)
.points(
Collections.singletonList(
new MetricPoint()
.timestamp(OffsetDateTime.now().toInstant().getEpochSecond())
.value(0.7)))
.resources(
Collections.singletonList(
new MetricResource().name("dummyhost").type("host")))));
try {
IntakePayloadAccepted result = apiInstance.submitMetrics(body);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling MetricsApi#submitMetrics");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Submit metrics with compression returns "Payload accepted" response
// Submit metrics with compression returns "Payload accepted" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.MetricsApi;
import com.datadog.api.client.v2.api.MetricsApi.SubmitMetricsOptionalParameters;
import com.datadog.api.client.v2.model.IntakePayloadAccepted;
import com.datadog.api.client.v2.model.MetricContentEncoding;
import com.datadog.api.client.v2.model.MetricIntakeType;
import com.datadog.api.client.v2.model.MetricPayload;
import com.datadog.api.client.v2.model.MetricPoint;
import com.datadog.api.client.v2.model.MetricSeries;
import java.time.OffsetDateTime;
import java.util.Collections;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
MetricsApi apiInstance = new MetricsApi(defaultClient);
MetricPayload body =
new MetricPayload()
.series(
Collections.singletonList(
new MetricSeries()
.metric("system.load.1")
.type(MetricIntakeType.UNSPECIFIED)
.points(
Collections.singletonList(
new MetricPoint()
.timestamp(OffsetDateTime.now().toInstant().getEpochSecond())
.value(0.7)))));
try {
IntakePayloadAccepted result =
apiInstance.submitMetrics(
body,
new SubmitMetricsOptionalParameters().contentEncoding(MetricContentEncoding.ZSTD1));
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling MetricsApi#submitMetrics");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"Submit metrics returns "Payload accepted" response
"""
Submit metrics returns "Payload accepted" response
"""
from datetime import datetime
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.metrics_api import MetricsApi
from datadog_api_client.v2.model.metric_intake_type import MetricIntakeType
from datadog_api_client.v2.model.metric_payload import MetricPayload
from datadog_api_client.v2.model.metric_point import MetricPoint
from datadog_api_client.v2.model.metric_resource import MetricResource
from datadog_api_client.v2.model.metric_series import MetricSeries
body = MetricPayload(
series=[
MetricSeries(
metric="system.load.1",
type=MetricIntakeType.UNSPECIFIED,
points=[
MetricPoint(
timestamp=int(datetime.now().timestamp()),
value=0.7,
),
],
resources=[
MetricResource(
name="dummyhost",
type="host",
),
],
),
],
)
configuration = Configuration()
with ApiClient(configuration) as api_client:
api_instance = MetricsApi(api_client)
response = api_instance.submit_metrics(body=body)
print(response)
Submit metrics with compression returns "Payload accepted" response
"""
Submit metrics with compression returns "Payload accepted" response
"""
from datetime import datetime
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.metrics_api import MetricsApi
from datadog_api_client.v2.model.metric_content_encoding import MetricContentEncoding
from datadog_api_client.v2.model.metric_intake_type import MetricIntakeType
from datadog_api_client.v2.model.metric_payload import MetricPayload
from datadog_api_client.v2.model.metric_point import MetricPoint
from datadog_api_client.v2.model.metric_series import MetricSeries
body = MetricPayload(
series=[
MetricSeries(
metric="system.load.1",
type=MetricIntakeType.UNSPECIFIED,
points=[
MetricPoint(
timestamp=int(datetime.now().timestamp()),
value=0.7,
),
],
),
],
)
configuration = Configuration()
with ApiClient(configuration) as api_client:
api_instance = MetricsApi(api_client)
response = api_instance.submit_metrics(content_encoding=MetricContentEncoding.ZSTD1, body=body)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"Submit metrics returns "Payload accepted" response
# Submit metrics returns "Payload accepted" response
require "datadog_api_client"
api_instance = DatadogAPIClient::V2::MetricsAPI.new
body = DatadogAPIClient::V2::MetricPayload.new({
series: [
DatadogAPIClient::V2::MetricSeries.new({
metric: "system.load.1",
type: DatadogAPIClient::V2::MetricIntakeType::UNSPECIFIED,
points: [
DatadogAPIClient::V2::MetricPoint.new({
timestamp: Time.now.to_i,
value: 0.7,
}),
],
resources: [
DatadogAPIClient::V2::MetricResource.new({
name: "dummyhost",
type: "host",
}),
],
}),
],
})
p api_instance.submit_metrics(body)
Submit metrics with compression returns "Payload accepted" response
# Submit metrics with compression returns "Payload accepted" response
require "datadog_api_client"
api_instance = DatadogAPIClient::V2::MetricsAPI.new
body = DatadogAPIClient::V2::MetricPayload.new({
series: [
DatadogAPIClient::V2::MetricSeries.new({
metric: "system.load.1",
type: DatadogAPIClient::V2::MetricIntakeType::UNSPECIFIED,
points: [
DatadogAPIClient::V2::MetricPoint.new({
timestamp: Time.now.to_i,
value: 0.7,
}),
],
}),
],
})
opts = {
content_encoding: MetricContentEncoding::ZSTD1,
}
p api_instance.submit_metrics(body, opts)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"Submit metrics returns "Payload accepted" response
// Submit metrics returns "Payload accepted" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_metrics::MetricsAPI;
use datadog_api_client::datadogV2::api_metrics::SubmitMetricsOptionalParams;
use datadog_api_client::datadogV2::model::MetricIntakeType;
use datadog_api_client::datadogV2::model::MetricPayload;
use datadog_api_client::datadogV2::model::MetricPoint;
use datadog_api_client::datadogV2::model::MetricResource;
use datadog_api_client::datadogV2::model::MetricSeries;
#[tokio::main]
async fn main() {
let body = MetricPayload::new(vec![MetricSeries::new(
"system.load.1".to_string(),
vec![MetricPoint::new().timestamp(1636629071).value(0.7 as f64)],
)
.resources(vec![MetricResource::new()
.name("dummyhost".to_string())
.type_("host".to_string())])
.type_(MetricIntakeType::UNSPECIFIED)]);
let configuration = datadog::Configuration::new();
let api = MetricsAPI::with_config(configuration);
let resp = api
.submit_metrics(body, SubmitMetricsOptionalParams::default())
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Submit metrics with compression returns "Payload accepted" response
// Submit metrics with compression returns "Payload accepted" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_metrics::MetricsAPI;
use datadog_api_client::datadogV2::api_metrics::SubmitMetricsOptionalParams;
use datadog_api_client::datadogV2::model::MetricContentEncoding;
use datadog_api_client::datadogV2::model::MetricIntakeType;
use datadog_api_client::datadogV2::model::MetricPayload;
use datadog_api_client::datadogV2::model::MetricPoint;
use datadog_api_client::datadogV2::model::MetricSeries;
#[tokio::main]
async fn main() {
let body = MetricPayload::new(vec![MetricSeries::new(
"system.load.1".to_string(),
vec![MetricPoint::new().timestamp(1636629071).value(0.7 as f64)],
)
.type_(MetricIntakeType::UNSPECIFIED)]);
let configuration = datadog::Configuration::new();
let api = MetricsAPI::with_config(configuration);
let resp = api
.submit_metrics(
body,
SubmitMetricsOptionalParams::default().content_encoding(MetricContentEncoding::ZSTD1),
)
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" cargo runSubmit metrics returns "Payload accepted" response
/**
* Submit metrics returns "Payload accepted" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration();
const apiInstance = new v2.MetricsApi(configuration);
const params: v2.MetricsApiSubmitMetricsRequest = {
body: {
series: [
{
metric: "system.load.1",
type: 0,
points: [
{
timestamp: Math.round(new Date().getTime() / 1000),
value: 0.7,
},
],
resources: [
{
name: "dummyhost",
type: "host",
},
],
},
],
},
};
apiInstance
.submitMetrics(params)
.then((data: v2.IntakePayloadAccepted) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Submit metrics with compression returns "Payload accepted" response
/**
* Submit metrics with compression returns "Payload accepted" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration();
const apiInstance = new v2.MetricsApi(configuration);
const params: v2.MetricsApiSubmitMetricsRequest = {
body: {
series: [
{
metric: "system.load.1",
type: 0,
points: [
{
timestamp: Math.round(new Date().getTime() / 1000),
value: 0.7,
},
],
},
],
},
contentEncoding: "zstd1",
};
apiInstance
.submitMetrics(params)
.then((data: v2.IntakePayloadAccepted) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"POST
https://api.datadoghq.com/api/v1/serieshttps://api.us3.datadoghq.com/api/v1/serieshttps://api.us5.datadoghq.com/api/v1/serieshttps://api.datadoghq.eu/api/v1/serieshttps://api.ap1.datadoghq.com/api/v1/serieshttps://api.ap2.datadoghq.com/api/v1/serieshttps://api.uk1.datadoghq.com/api/v1/serieshttps://api.ddog-gov.com/api/v1/serieshttps://api.us2.ddog-gov.com/api/v1/seriesDescripción general
El endpoint de métricas te permite publicar datos de series temporales que pueden representarse gráficamente en dashboards de Datadog. El tamaño máximo de la carga útil es de 3,2 megabytes (3200000 bytes). Las cargas útiles comprimidas deben tener un tamaño descomprimido inferior a 62 megabytes (62914560 bytes).
Si envías métricas directamente a la API Datadog sin utilizar DogStatsD, espera:
- 64 bits para la marca de tiempo
- 64 bits para el valor
- 40 bytes para los nombres de métrica
- 50 bytes para las series temporales
- La carga útil completa es de aproximadamente 100 bytes. Sin embargo, con la API DogStatsD se aplica una compresión, lo que reduce el tamaño de la carga útil.
Argumentos
Parámetros de encabezado
Nombre
Type
Descripción
Content-Encodingenum
HTTP header used to compress the media-type.
deflateAllowed enum values:
deflate, gzipSolicitud
Body Data (required)
Campo
Type
Descripción
series [required][object]
Carga útil de las métricas.
hoststring
The name of the host that produced the metric.
intervalint64
If the type of the metric is rate or count, define the corresponding interval in seconds.
nullmetric [required]string
The name of the timeseries.
points [required][array]
Points relating to a metric. All points must be tuples with timestamp and a scalar value (cannot be a string). Timestamps should be in POSIX time in seconds, and cannot be more than ten minutes in the future or more than one hour in the past.
tags[string]
A list of tags associated with the metric.
typestring
The type of the metric. Valid types are "",count, gauge, and rate.
""Submit deflate metrics returns "Payload accepted" response
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}Submit metrics returns "Payload accepted" response
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}Respuesta
Payload accepted
The payload accepted for intake.
Campo
Type
Descripción
statusstring
The status of the intake payload.
{
"status": "ok"
}Bad Request
Error response object.
Campo
Type
Descripción
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Authentication error
Error response object.
Campo
Type
Descripción
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Request timeout
Error response object.
Campo
Type
Descripción
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Payload too large
Error response object.
Campo
Type
Descripción
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Too many requests
Error response object.
Campo
Type
Descripción
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Ejemplo de código
Submit deflate metrics returns "Payload accepted" response
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
export DD_API_KEY="<DD_API_KEY>"
printf '%s' "$(cat <<'EOF'
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF
)" | python3 -c 'import sys, zlib; sys.stdout.buffer.write(zlib.compress(sys.stdin.buffer.read()))' | curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Content-Encoding: deflate" \
-H "DD-API-KEY: ${DD_API_KEY}" \
--data-binary @-Submit metrics returns "Payload accepted" response
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOF# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
export DD_API_KEY="<DD_API_KEY>"
curl -X POST "https://api.${DD_SITE}/api/v1/series" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "DD-API-KEY: ${DD_API_KEY}" \
-d @- << EOF
{
"series": [
{
"metric": "system.load.1",
"type": "gauge",
"points": [
[
1636629071,
1.1
]
],
"tags": [
"test:ExampleMetric"
]
}
]
}
EOFSubmit deflate metrics returns "Payload accepted" response
// Submit deflate metrics returns "Payload accepted" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"time"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV1"
)
func main() {
body := datadogV1.MetricsPayload{
Series: []datadogV1.Series{
{
Metric: "system.load.1",
Type: datadog.PtrString("gauge"),
Points: [][]*float64{
{
datadog.PtrFloat64(float64(time.Now().Unix())),
datadog.PtrFloat64(1.1),
},
},
Tags: []string{
"test:ExampleMetric",
},
},
},
}
ctx := datadog.NewDefaultContext(context.Background())
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV1.NewMetricsApi(apiClient)
resp, r, err := api.SubmitMetrics(ctx, body, *datadogV1.NewSubmitMetricsOptionalParameters().WithContentEncoding(datadogV1.METRICCONTENTENCODING_DEFLATE))
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `MetricsApi.SubmitMetrics`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `MetricsApi.SubmitMetrics`:\n%s\n", responseContent)
}
Submit metrics returns "Payload accepted" response
// Submit metrics returns "Payload accepted" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"time"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV1"
)
func main() {
body := datadogV1.MetricsPayload{
Series: []datadogV1.Series{
{
Metric: "system.load.1",
Type: datadog.PtrString("gauge"),
Points: [][]*float64{
{
datadog.PtrFloat64(float64(time.Now().Unix())),
datadog.PtrFloat64(1.1),
},
},
Tags: []string{
"test:ExampleMetric",
},
},
},
}
ctx := datadog.NewDefaultContext(context.Background())
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV1.NewMetricsApi(apiClient)
resp, r, err := api.SubmitMetrics(ctx, body, *datadogV1.NewSubmitMetricsOptionalParameters())
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `MetricsApi.SubmitMetrics`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `MetricsApi.SubmitMetrics`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" go run "main.go"Submit deflate metrics returns "Payload accepted" response
// Submit deflate metrics returns "Payload accepted" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v1.api.MetricsApi;
import com.datadog.api.client.v1.api.MetricsApi.SubmitMetricsOptionalParameters;
import com.datadog.api.client.v1.model.IntakePayloadAccepted;
import com.datadog.api.client.v1.model.MetricContentEncoding;
import com.datadog.api.client.v1.model.MetricsPayload;
import com.datadog.api.client.v1.model.Series;
import java.time.OffsetDateTime;
import java.util.Arrays;
import java.util.Collections;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
MetricsApi apiInstance = new MetricsApi(defaultClient);
MetricsPayload body =
new MetricsPayload()
.series(
Collections.singletonList(
new Series()
.metric("system.load.1")
.type("gauge")
.points(
Collections.singletonList(
Arrays.asList(
Long.valueOf(OffsetDateTime.now().toInstant().getEpochSecond())
.doubleValue(),
1.1)))
.tags(Collections.singletonList("test:ExampleMetric"))));
try {
IntakePayloadAccepted result =
apiInstance.submitMetrics(
body,
new SubmitMetricsOptionalParameters().contentEncoding(MetricContentEncoding.DEFLATE));
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling MetricsApi#submitMetrics");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Submit metrics returns "Payload accepted" response
// Submit metrics returns "Payload accepted" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v1.api.MetricsApi;
import com.datadog.api.client.v1.model.IntakePayloadAccepted;
import com.datadog.api.client.v1.model.MetricsPayload;
import com.datadog.api.client.v1.model.Series;
import java.time.OffsetDateTime;
import java.util.Arrays;
import java.util.Collections;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
MetricsApi apiInstance = new MetricsApi(defaultClient);
MetricsPayload body =
new MetricsPayload()
.series(
Collections.singletonList(
new Series()
.metric("system.load.1")
.type("gauge")
.points(
Collections.singletonList(
Arrays.asList(
Long.valueOf(OffsetDateTime.now().toInstant().getEpochSecond())
.doubleValue(),
1.1)))
.tags(Collections.singletonList("test:ExampleMetric"))));
try {
IntakePayloadAccepted result = apiInstance.submitMetrics(body);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling MetricsApi#submitMetrics");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" java "Example.java"Submit deflate metrics returns "Payload accepted" response
"""
Submit deflate metrics returns "Payload accepted" response
"""
from datetime import datetime
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v1.api.metrics_api import MetricsApi
from datadog_api_client.v1.model.metric_content_encoding import MetricContentEncoding
from datadog_api_client.v1.model.metrics_payload import MetricsPayload
from datadog_api_client.v1.model.point import Point
from datadog_api_client.v1.model.series import Series
body = MetricsPayload(
series=[
Series(
metric="system.load.1",
type="gauge",
points=[
Point(
[
datetime.now().timestamp(),
1.1,
]
),
],
tags=[
"test:ExampleMetric",
],
),
],
)
configuration = Configuration()
with ApiClient(configuration) as api_client:
api_instance = MetricsApi(api_client)
response = api_instance.submit_metrics(content_encoding=MetricContentEncoding.DEFLATE, body=body)
print(response)
Submit metrics returns "Payload accepted" response
"""
Submit metrics returns "Payload accepted" response
"""
from datetime import datetime
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v1.api.metrics_api import MetricsApi
from datadog_api_client.v1.model.metrics_payload import MetricsPayload
from datadog_api_client.v1.model.point import Point
from datadog_api_client.v1.model.series import Series
body = MetricsPayload(
series=[
Series(
metric="system.load.1",
type="gauge",
points=[
Point(
[
datetime.now().timestamp(),
1.1,
]
),
],
tags=[
"test:ExampleMetric",
],
),
],
)
configuration = Configuration()
with ApiClient(configuration) as api_client:
api_instance = MetricsApi(api_client)
response = api_instance.submit_metrics(body=body)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" python3 "example.py"Submit deflate metrics returns "Payload accepted" response
# Submit deflate metrics returns "Payload accepted" response
require "datadog_api_client"
api_instance = DatadogAPIClient::V1::MetricsAPI.new
body = DatadogAPIClient::V1::MetricsPayload.new({
series: [
DatadogAPIClient::V1::Series.new({
metric: "system.load.1",
type: "gauge",
points: [
[
Time.now.to_f,
1.1,
],
],
tags: [
"test:ExampleMetric",
],
}),
],
})
opts = {
content_encoding: MetricContentEncoding::DEFLATE,
}
p api_instance.submit_metrics(body, opts)
Submit metrics returns "Payload accepted" response
# Submit metrics returns "Payload accepted" response
require "datadog_api_client"
api_instance = DatadogAPIClient::V1::MetricsAPI.new
body = DatadogAPIClient::V1::MetricsPayload.new({
series: [
DatadogAPIClient::V1::Series.new({
metric: "system.load.1",
type: "gauge",
points: [
[
Time.now.to_f,
1.1,
],
],
tags: [
"test:ExampleMetric",
],
}),
],
})
p api_instance.submit_metrics(body)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"Submit deflate metrics returns "Payload accepted" response
// Submit deflate metrics returns "Payload accepted" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV1::api_metrics::MetricsAPI;
use datadog_api_client::datadogV1::api_metrics::SubmitMetricsOptionalParams;
use datadog_api_client::datadogV1::model::MetricContentEncoding;
use datadog_api_client::datadogV1::model::MetricsPayload;
use datadog_api_client::datadogV1::model::Series;
#[tokio::main]
async fn main() {
let body = MetricsPayload::new(vec![Series::new(
"system.load.1".to_string(),
vec![vec![Some(1636629071.0 as f64), Some(1.1 as f64)]],
)
.tags(vec!["test:ExampleMetric".to_string()])
.type_("gauge".to_string())]);
let configuration = datadog::Configuration::new();
let api = MetricsAPI::with_config(configuration);
let resp = api
.submit_metrics(
body,
SubmitMetricsOptionalParams::default().content_encoding(MetricContentEncoding::DEFLATE),
)
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Submit metrics returns "Payload accepted" response
// Submit metrics returns "Payload accepted" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV1::api_metrics::MetricsAPI;
use datadog_api_client::datadogV1::api_metrics::SubmitMetricsOptionalParams;
use datadog_api_client::datadogV1::model::MetricsPayload;
use datadog_api_client::datadogV1::model::Series;
#[tokio::main]
async fn main() {
let body = MetricsPayload::new(vec![Series::new(
"system.load.1".to_string(),
vec![vec![Some(1636629071.0 as f64), Some(1.1 as f64)]],
)
.tags(vec!["test:ExampleMetric".to_string()])
.type_("gauge".to_string())]);
let configuration = datadog::Configuration::new();
let api = MetricsAPI::with_config(configuration);
let resp = api
.submit_metrics(body, SubmitMetricsOptionalParams::default())
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" cargo runSubmit deflate metrics returns "Payload accepted" response
/**
* Submit deflate metrics returns "Payload accepted" response
*/
import { client, v1 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration();
const apiInstance = new v1.MetricsApi(configuration);
const params: v1.MetricsApiSubmitMetricsRequest = {
body: {
series: [
{
metric: "system.load.1",
type: "gauge",
points: [[Math.round(new Date().getTime() / 1000), 1.1]],
tags: ["test:ExampleMetric"],
},
],
},
contentEncoding: "deflate",
};
apiInstance
.submitMetrics(params)
.then((data: v1.IntakePayloadAccepted) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Submit metrics returns "Payload accepted" response
/**
* Submit metrics returns "Payload accepted" response
*/
import { client, v1 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration();
const apiInstance = new v1.MetricsApi(configuration);
const params: v1.MetricsApiSubmitMetricsRequest = {
body: {
series: [
{
metric: "system.load.1",
type: "gauge",
points: [[Math.round(new Date().getTime() / 1000), 1.1]],
tags: ["test:ExampleMetric"],
},
],
},
};
apiInstance
.submitMetrics(params)
.then((data: v1.IntakePayloadAccepted) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" tsc "example.ts"Submit metrics returns "Payload accepted" response
from datadog import initialize, api
import time
options = {
'api_key': '<DATADOG_API_KEY>'
## EU costumers need to define 'api_host' as below
#'api_host': 'https://api.datadoghq.eu/'
}
initialize(**options)
now = time.time()
future_10s = now + 10
# Submit a single point with a timestamp of `now`
api.Metric.send(metric='page.views', points=1000)
# Submit a point with a timestamp (must be current)
api.Metric.send(metric='my.pair', points=(now, 15))
# Submit multiple points.
api.Metric.send(
metric='my.series',
points=[
(now, 15),
(future_10s, 16)
]
)
# Submit a point with a host and tags.
api.Metric.send(
metric='my.series',
points=100,
host="myhost.example.com",
tags=["version:1"]
)
# Submit multiple metrics
api.Metric.send([{
'metric': 'my.series',
'points': 15
}, {
'metric': 'my1.series',
'points': 16
}])
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" python "example.py"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python "example.py"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python "example.py"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" python "example.py"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python "example.py"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python "example.py"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" python "example.py"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" python "example.py"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" python "example.py"Submit metrics returns "Payload accepted" response
require 'rubygems'
require 'dogapi'
api_key = '<DATADOG_API_KEY>'
dog = Dogapi::Client.new(api_key)
# Submit one metric value.
dog.emit_point('some.metric.name', 50.0, :host => "my_host.example.com")
# Submit multiple metric values
points = [
[Time.now, 0],
[Time.now + 10, 10.0],
[Time.now + 20, 20.0]
]
dog.emit_points('some.metric.name', points, :tags => ["version:1"])
# Emit differents metrics in a single request to be more efficient
dog.batch_metrics do
dog.emit_point('test.api.test_metric',10)
dog.emit_point('test.api.this_other_metric', 1)
end
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" rb "example.rb"