Create an Amazon EventBridge source
https://api.datadoghq.com/api/v2/integration/aws/event_bridgehttps://api.us3.datadoghq.com/api/v2/integration/aws/event_bridgehttps://api.us5.datadoghq.com/api/v2/integration/aws/event_bridgehttps://api.datadoghq.eu/api/v2/integration/aws/event_bridgehttps://api.ap1.datadoghq.com/api/v2/integration/aws/event_bridgehttps://api.ap2.datadoghq.com/api/v2/integration/aws/event_bridgehttps://api.uk1.datadoghq.com/api/v2/integration/aws/event_bridgehttps://api.ddog-gov.com/api/v2/integration/aws/event_bridgehttps://api.us2.ddog-gov.com/api/v2/integration/aws/event_bridge概要
Create an Amazon EventBridge source.
リクエスト
Body Data (required)
Create an Amazon EventBridge source for an AWS account with a given name and region.
data [required]Amazon EventBridge create request data.
attributes [required]The EventBridge source to be created.
account_id [required]AWS Account ID.
create_event_busSet to true if Datadog should create the event bus in addition to the event
source. Requires the events:CreateEventBus permission.
event_generator_name [required]The given part of the event source name, which is then combined with an assigned suffix to form the full name.
type [required]Amazon EventBridge resource type.
event_bridgeevent_bridge{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}応答
Amazon EventBridge source created.
Amazon EventBridge create response body.
data [required]Amazon EventBridge create response data.
attributes [required]A created EventBridge source.
event_source_nameThe event source name.
has_busTrue if the event bus was created in addition to the source.
statusThe event source status "created".
createdidThe ID of the Amazon EventBridge create response data.
create_event_bridgetype [required]Amazon EventBridge resource type.
event_bridgeevent_bridge{
"data": {
"attributes": {
"event_source_name": "app-alerts-zyxw3210",
"has_bus": true,
"region": "us-east-1",
"status": "created"
},
"id": "create_event_bridge",
"type": "event_bridge"
}
}Bad Request
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}Forbidden
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}Conflict
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}コード例
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v2/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
},
"type": "event_bridge"
}
}
EOF// Create an Amazon EventBridge source returns "Amazon EventBridge source created." response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
body := datadogV2.AWSEventBridgeCreateRequest{
Data: datadogV2.AWSEventBridgeCreateRequestData{
Attributes: datadogV2.AWSEventBridgeCreateRequestAttributes{
AccountId: "123456789012",
CreateEventBus: datadog.PtrBool(true),
EventGeneratorName: "app-alerts",
Region: "us-east-1",
},
Type: datadogV2.AWSEVENTBRIDGETYPE_EVENT_BRIDGE,
},
}
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewAWSIntegrationApi(apiClient)
resp, r, err := api.CreateAWSEventBridgeSource(ctx, body)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `AWSIntegrationApi.CreateAWSEventBridgeSource`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `AWSIntegrationApi.CreateAWSEventBridgeSource`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"// Create an Amazon EventBridge source returns "Amazon EventBridge source created." response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.AwsIntegrationApi;
import com.datadog.api.client.v2.model.AWSEventBridgeCreateRequest;
import com.datadog.api.client.v2.model.AWSEventBridgeCreateRequestAttributes;
import com.datadog.api.client.v2.model.AWSEventBridgeCreateRequestData;
import com.datadog.api.client.v2.model.AWSEventBridgeCreateResponse;
import com.datadog.api.client.v2.model.AWSEventBridgeType;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
AwsIntegrationApi apiInstance = new AwsIntegrationApi(defaultClient);
AWSEventBridgeCreateRequest body =
new AWSEventBridgeCreateRequest()
.data(
new AWSEventBridgeCreateRequestData()
.attributes(
new AWSEventBridgeCreateRequestAttributes()
.accountId("123456789012")
.createEventBus(true)
.eventGeneratorName("app-alerts")
.region("us-east-1"))
.type(AWSEventBridgeType.EVENT_BRIDGE));
try {
AWSEventBridgeCreateResponse result = apiInstance.createAWSEventBridgeSource(body);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling AwsIntegrationApi#createAWSEventBridgeSource");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java""""
Create an Amazon EventBridge source returns "Amazon EventBridge source created." response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.aws_integration_api import AWSIntegrationApi
from datadog_api_client.v2.model.aws_event_bridge_create_request import AWSEventBridgeCreateRequest
from datadog_api_client.v2.model.aws_event_bridge_create_request_attributes import AWSEventBridgeCreateRequestAttributes
from datadog_api_client.v2.model.aws_event_bridge_create_request_data import AWSEventBridgeCreateRequestData
from datadog_api_client.v2.model.aws_event_bridge_type import AWSEventBridgeType
body = AWSEventBridgeCreateRequest(
data=AWSEventBridgeCreateRequestData(
attributes=AWSEventBridgeCreateRequestAttributes(
account_id="123456789012",
create_event_bus=True,
event_generator_name="app-alerts",
region="us-east-1",
),
type=AWSEventBridgeType.EVENT_BRIDGE,
),
)
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = AWSIntegrationApi(api_client)
response = api_instance.create_aws_event_bridge_source(body=body)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"# Create an Amazon EventBridge source returns "Amazon EventBridge source created." response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::AWSIntegrationAPI.new
body = DatadogAPIClient::V2::AWSEventBridgeCreateRequest.new({
data: DatadogAPIClient::V2::AWSEventBridgeCreateRequestData.new({
attributes: DatadogAPIClient::V2::AWSEventBridgeCreateRequestAttributes.new({
account_id: "123456789012",
create_event_bus: true,
event_generator_name: "app-alerts",
region: "us-east-1",
}),
type: DatadogAPIClient::V2::AWSEventBridgeType::EVENT_BRIDGE,
}),
})
p api_instance.create_aws_event_bridge_source(body)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"// Create an Amazon EventBridge source returns "Amazon EventBridge source
// created." response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_aws_integration::AWSIntegrationAPI;
use datadog_api_client::datadogV2::model::AWSEventBridgeCreateRequest;
use datadog_api_client::datadogV2::model::AWSEventBridgeCreateRequestAttributes;
use datadog_api_client::datadogV2::model::AWSEventBridgeCreateRequestData;
use datadog_api_client::datadogV2::model::AWSEventBridgeType;
#[tokio::main]
async fn main() {
let body = AWSEventBridgeCreateRequest::new(AWSEventBridgeCreateRequestData::new(
AWSEventBridgeCreateRequestAttributes::new(
"123456789012".to_string(),
"app-alerts".to_string(),
"us-east-1".to_string(),
)
.create_event_bus(true),
AWSEventBridgeType::EVENT_BRIDGE,
));
let configuration = datadog::Configuration::new();
let api = AWSIntegrationAPI::with_config(configuration);
let resp = api.create_aws_event_bridge_source(body).await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run/**
* Create an Amazon EventBridge source returns "Amazon EventBridge source created." response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.AWSIntegrationApi(configuration);
const params: v2.AWSIntegrationApiCreateAWSEventBridgeSourceRequest = {
body: {
data: {
attributes: {
accountId: "123456789012",
createEventBus: true,
eventGeneratorName: "app-alerts",
region: "us-east-1",
},
type: "event_bridge",
},
},
};
apiInstance
.createAWSEventBridgeSource(params)
.then((data: v2.AWSEventBridgeCreateResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"https://api.datadoghq.com/api/v1/integration/aws/event_bridgehttps://api.us3.datadoghq.com/api/v1/integration/aws/event_bridgehttps://api.us5.datadoghq.com/api/v1/integration/aws/event_bridgehttps://api.datadoghq.eu/api/v1/integration/aws/event_bridgehttps://api.ap1.datadoghq.com/api/v1/integration/aws/event_bridgehttps://api.ap2.datadoghq.com/api/v1/integration/aws/event_bridgehttps://api.uk1.datadoghq.com/api/v1/integration/aws/event_bridgehttps://api.ddog-gov.com/api/v1/integration/aws/event_bridgehttps://api.us2.ddog-gov.com/api/v1/integration/aws/event_bridge概要
このエンドポイントは非推奨です。代わりに V2 エンドポイントを使用してください。 Amazon EventBridge ソースを作成します。
リクエスト
Body Data (required)
指定された名前とリージョンを持つ AWS アカウントの Amazon EventBridge ソースを作成します。
account_idEventBridge ソースを作成するために使用されるオブジェクト。
create_event_busTrue if Datadog should create the event bus in addition to the event
source. Requires the events:CreateEventBus permission.
event_generator_nameThe given part of the event source name, which is then combined with an assigned suffix to form the full name.
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}応答
OK
A created EventBridge source.
event_source_nameThe event source name.
has_busTrue if the event bus was created in addition to the source.
statusThe event source status "created".
created{
"event_source_name": "app-alerts-zyxw3210",
"has_bus": true,
"region": "us-east-1",
"status": "created"
}Bad Request
Error response object.
errors [required]Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Authentication Error
Error response object.
errors [required]Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Too many requests
Error response object.
errors [required]Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}コード例
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X POST "https://api.${DD_SITE}/api/v1/integration/aws/event_bridge" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"account_id": "123456789012",
"create_event_bus": true,
"event_generator_name": "app-alerts",
"region": "us-east-1"
}
EOF// Create an Amazon EventBridge source returns "OK" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV1"
)
func main() {
body := datadogV1.AWSEventBridgeCreateRequest{
AccountId: datadog.PtrString("123456789012"),
CreateEventBus: datadog.PtrBool(true),
EventGeneratorName: datadog.PtrString("app-alerts"),
Region: datadog.PtrString("us-east-1"),
}
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV1.NewAWSIntegrationApi(apiClient)
resp, r, err := api.CreateAWSEventBridgeSource(ctx, body)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `AWSIntegrationApi.CreateAWSEventBridgeSource`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `AWSIntegrationApi.CreateAWSEventBridgeSource`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"// Create an Amazon EventBridge source returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v1.api.AwsIntegrationApi;
import com.datadog.api.client.v1.model.AWSEventBridgeCreateRequest;
import com.datadog.api.client.v1.model.AWSEventBridgeCreateResponse;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
AwsIntegrationApi apiInstance = new AwsIntegrationApi(defaultClient);
AWSEventBridgeCreateRequest body =
new AWSEventBridgeCreateRequest()
.accountId("123456789012")
.createEventBus(true)
.eventGeneratorName("app-alerts")
.region("us-east-1");
try {
AWSEventBridgeCreateResponse result = apiInstance.createAWSEventBridgeSource(body);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling AwsIntegrationApi#createAWSEventBridgeSource");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java""""
Create an Amazon EventBridge source returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v1.api.aws_integration_api import AWSIntegrationApi
from datadog_api_client.v1.model.aws_event_bridge_create_request import AWSEventBridgeCreateRequest
body = AWSEventBridgeCreateRequest(
account_id="123456789012",
create_event_bus=True,
event_generator_name="app-alerts",
region="us-east-1",
)
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = AWSIntegrationApi(api_client)
response = api_instance.create_aws_event_bridge_source(body=body)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"# Create an Amazon EventBridge source returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V1::AWSIntegrationAPI.new
body = DatadogAPIClient::V1::AWSEventBridgeCreateRequest.new({
account_id: "123456789012",
create_event_bus: true,
event_generator_name: "app-alerts",
region: "us-east-1",
})
p api_instance.create_aws_event_bridge_source(body)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"// Create an Amazon EventBridge source returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV1::api_aws_integration::AWSIntegrationAPI;
use datadog_api_client::datadogV1::model::AWSEventBridgeCreateRequest;
#[tokio::main]
async fn main() {
let body = AWSEventBridgeCreateRequest::new()
.account_id("123456789012".to_string())
.create_event_bus(true)
.event_generator_name("app-alerts".to_string())
.region("us-east-1".to_string());
let configuration = datadog::Configuration::new();
let api = AWSIntegrationAPI::with_config(configuration);
let resp = api.create_aws_event_bridge_source(body).await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run/**
* Create an Amazon EventBridge source returns "OK" response
*/
import { client, v1 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v1.AWSIntegrationApi(configuration);
const params: v1.AWSIntegrationApiCreateAWSEventBridgeSourceRequest = {
body: {
accountId: "123456789012",
createEventBus: true,
eventGeneratorName: "app-alerts",
region: "us-east-1",
},
};
apiInstance
.createAWSEventBridgeSource(params)
.then((data: v1.AWSEventBridgeCreateResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"