Delete an automation rule
DELETE
https://api.datadoghq.com/api/v2/cases/projects/{project_id}/rules/{rule_id}https://api.us3.datadoghq.com/api/v2/cases/projects/{project_id}/rules/{rule_id}https://api.us5.datadoghq.com/api/v2/cases/projects/{project_id}/rules/{rule_id}https://api.datadoghq.eu/api/v2/cases/projects/{project_id}/rules/{rule_id}https://api.ap1.datadoghq.com/api/v2/cases/projects/{project_id}/rules/{rule_id}https://api.ap2.datadoghq.com/api/v2/cases/projects/{project_id}/rules/{rule_id}https://api.uk1.datadoghq.com/api/v2/cases/projects/{project_id}/rules/{rule_id}https://api.ddog-gov.com/api/v2/cases/projects/{project_id}/rules/{rule_id}https://api.us2.ddog-gov.com/api/v2/cases/projects/{project_id}/rules/{rule_id}概要
Permanently deletes an automation rule from a project.
OAuth apps require the cases_write authorization scope to access this endpoint.
引数
パスパラメーター
名前
タイプ
説明
project_id [required]string
The UUID of the project that owns the automation rules.
rule_id [required]string
The UUID of the automation rule.
応答
No Content
Forbidden
API error response.
フィールド
タイプ
説明
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Not Found
API error response.
フィールド
タイプ
説明
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
フィールド
タイプ
説明
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}コード例
Delete an automation rule
# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export project_id="e555e290-ed65-49bd-ae18-8acbfcf18db7"
export rule_id="e6773723-fe58-49ff-9975-dff00f14e28d"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/cases/projects/${project_id}/rules/${rule_id}" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"Delete an automation rule
// Delete an automation rule returns "No Content" response
package main
import (
"context"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewCaseManagementApi(apiClient)
r, err := api.DeleteCaseAutomationRule(ctx, "project_id", "rule_id")
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `CaseManagementApi.DeleteCaseAutomationRule`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"Delete an automation rule
// Delete an automation rule returns "No Content" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.CaseManagementApi;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
CaseManagementApi apiInstance = new CaseManagementApi(defaultClient);
try {
apiInstance.deleteCaseAutomationRule(
"e555e290-ed65-49bd-ae18-8acbfcf18db7", "e6773723-fe58-49ff-9975-dff00f14e28d");
} catch (ApiException e) {
System.err.println("Exception when calling CaseManagementApi#deleteCaseAutomationRule");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"Delete an automation rule
"""
Delete an automation rule returns "No Content" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.case_management_api import CaseManagementApi
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = CaseManagementApi(api_client)
api_instance.delete_case_automation_rule(
project_id="project_id",
rule_id="rule_id",
)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"Delete an automation rule
# Delete an automation rule returns "No Content" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::CaseManagementAPI.new
api_instance.delete_case_automation_rule("project_id", "rule_id")
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"Delete an automation rule
// Delete an automation rule returns "No Content" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_case_management::CaseManagementAPI;
#[tokio::main]
async fn main() {
let configuration = datadog::Configuration::new();
let api = CaseManagementAPI::with_config(configuration);
let resp = api
.delete_case_automation_rule("project_id".to_string(), "rule_id".to_string())
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDelete an automation rule
/**
* Delete an automation rule returns "No Content" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.CaseManagementApi(configuration);
const params: v2.CaseManagementApiDeleteCaseAutomationRuleRequest = {
projectId: "project_id",
ruleId: "rule_id",
};
apiInstance
.deleteCaseAutomationRule(params)
.then((data: any) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"