CSM 호스트 및 Containers 범위 분석 가져오기 - CSM Coverage Analysis

GEThttps://api.datadoghq.com/api/v2/csm/onboarding/coverage_analysis/hosts_and_containershttps://api.us3.datadoghq.com/api/v2/csm/onboarding/coverage_analysis/hosts_and_containershttps://api.us5.datadoghq.com/api/v2/csm/onboarding/coverage_analysis/hosts_and_containershttps://api.datadoghq.eu/api/v2/csm/onboarding/coverage_analysis/hosts_and_containershttps://api.ap1.datadoghq.com/api/v2/csm/onboarding/coverage_analysis/hosts_and_containershttps://api.ap2.datadoghq.com/api/v2/csm/onboarding/coverage_analysis/hosts_and_containershttps://api.uk1.datadoghq.com/api/v2/csm/onboarding/coverage_analysis/hosts_and_containershttps://api.ddog-gov.com/api/v2/csm/onboarding/coverage_analysis/hosts_and_containershttps://api.us2.ddog-gov.com/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers

개요

호스트 및 Containers의 CSM 범위 분석을 가져옵니다. 이는 호스트에서 실행 중인 에이전트 수와 CSM 기능이 활성화된 Containers 수를 기준으로 계산됩니다.

응답

CSM Hosts and Containers Coverage Analysis response.

항목

유형

설명

data

object

CSM Hosts and Containers Coverage Analysis data.

{
  "data": {
    "attributes": {
      "cspm_coverage": {
        "configured_resources_count": 8,
        "coverage": 0.8,
        "partially_configured_resources_count": 0,
        "total_resources_count": 10
      },
      "cws_coverage": {
        "configured_resources_count": 8,
        "coverage": 0.8,
        "partially_configured_resources_count": 0,
        "total_resources_count": 10
      },
      "org_id": 123456,
      "total_coverage": {
        "configured_resources_count": 8,
        "coverage": 0.8,
        "partially_configured_resources_count": 0,
        "total_resources_count": 10
      },
      "vm_coverage": {
        "configured_resources_count": 8,
        "coverage": 0.8,
        "partially_configured_resources_count": 0,
        "total_resources_count": 10
      }
    },
    "id": "66b3c6b5-5c9a-457e-b1c3-f247ca23afa3",
    "type": "get_hosts_and_containers_coverage_analysis_response_public_v0"
  }
}

Not Authorized

API error response.

항목

유형

설명

errors [required]

[string]

A list of errors.

{
  "errors": [
    "Bad Request"
  ]
}

Too many requests

API error response.

항목

유형

설명

errors [required]

[string]

A list of errors.

{
  "errors": [
    "Bad Request"
  ]
}

코드 예시

CSM 호스트 및 Containers 범위 분석 가져오기

# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/csm/onboarding/coverage_analysis/hosts_and_containers" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

CSM 호스트 및 Containers 범위 분석 가져오기

// Get the CSM Hosts and Containers Coverage Analysis returns "OK" response

package main

import (
	"context"
	"encoding/json"
	"fmt"
	"os"

	"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
	"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)

func main() {
	ctx := datadog.NewDefaultContext(context.Background())
	ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
	configuration := datadog.NewConfiguration()
	apiClient := datadog.NewAPIClient(configuration)
	api := datadogV2.NewCSMCoverageAnalysisApi(apiClient)
	resp, r, err := api.GetCSMHostsAndContainersCoverageAnalysis(ctx)

	if err != nil {
		fmt.Fprintf(os.Stderr, "Error when calling `CSMCoverageAnalysisApi.GetCSMHostsAndContainersCoverageAnalysis`: %v\n", err)
		fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
	}

	responseContent, _ := json.MarshalIndent(resp, "", "  ")
	fmt.Fprintf(os.Stdout, "Response from `CSMCoverageAnalysisApi.GetCSMHostsAndContainersCoverageAnalysis`:\n%s\n", responseContent)
}

Instructions

First install the library and its dependencies and then save the example to main.go and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

CSM 호스트 및 Containers 범위 분석 가져오기

// Get the CSM Hosts and Containers Coverage Analysis returns "OK" response

import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.CsmCoverageAnalysisApi;
import com.datadog.api.client.v2.model.CsmHostsAndContainersCoverageAnalysisResponse;

public class Example {
  public static void main(String[] args) {
    ApiClient defaultClient = ApiClient.getDefaultApiClient();
    defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
    CsmCoverageAnalysisApi apiInstance = new CsmCoverageAnalysisApi(defaultClient);

    try {
      CsmHostsAndContainersCoverageAnalysisResponse result =
          apiInstance.getCSMHostsAndContainersCoverageAnalysis();
      System.out.println(result);
    } catch (ApiException e) {
      System.err.println(
          "Exception when calling CsmCoverageAnalysisApi#getCSMHostsAndContainersCoverageAnalysis");
      System.err.println("Status code: " + e.getCode());
      System.err.println("Reason: " + e.getResponseBody());
      System.err.println("Response headers: " + e.getResponseHeaders());
      e.printStackTrace();
    }
  }
}

Instructions

First install the library and its dependencies and then save the example to Example.java and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

CSM 호스트 및 Containers 범위 분석 가져오기

"""
Get the CSM Hosts and Containers Coverage Analysis returns "OK" response
"""

from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.csm_coverage_analysis_api import CSMCoverageAnalysisApi

configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
    api_instance = CSMCoverageAnalysisApi(api_client)
    response = api_instance.get_csm_hosts_and_containers_coverage_analysis()

    print(response)

Instructions

First install the library and its dependencies and then save the example to example.py and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

CSM 호스트 및 Containers 범위 분석 가져오기

# Get the CSM Hosts and Containers Coverage Analysis returns "OK" response

require "datadog_api_client"
DatadogAPIClient.configure do |config|
  config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::CSMCoverageAnalysisAPI.new
p api_instance.get_csm_hosts_and_containers_coverage_analysis()

Instructions

First install the library and its dependencies and then save the example to example.rb and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

CSM 호스트 및 Containers 범위 분석 가져오기

// Get the CSM Hosts and Containers Coverage Analysis returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_csm_coverage_analysis::CSMCoverageAnalysisAPI;

#[tokio::main]
async fn main() {
    let configuration = datadog::Configuration::new();
    let api = CSMCoverageAnalysisAPI::with_config(configuration);
    let resp = api.get_csm_hosts_and_containers_coverage_analysis().await;
    if let Ok(value) = resp {
        println!("{:#?}", value);
    } else {
        println!("{:#?}", resp.unwrap_err());
    }
}

Instructions

First install the library and its dependencies and then save the example to src/main.rs and run following commands:

DD_SITE="datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

DD_SITE="us3.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

DD_SITE="us5.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

DD_SITE="datadoghq.eu" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

DD_SITE="ap1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

DD_SITE="ap2.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

DD_SITE="uk1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

DD_SITE="ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

DD_SITE="us2.ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run

CSM 호스트 및 Containers 범위 분석 가져오기

/**
 * Get the CSM Hosts and Containers Coverage Analysis returns "OK" response
 */

import { client, v2 } from "@datadog/datadog-api-client";

const configuration = client.createConfiguration({
  authMethods: {
    AuthZ: {
      accessToken: process.env.DD_BEARER_TOKEN as string,
    },
  },
});
const apiInstance = new v2.CSMCoverageAnalysisApi(configuration);

apiInstance
  .getCSMHostsAndContainersCoverageAnalysis()
  .then((data: v2.CsmHostsAndContainersCoverageAnalysisResponse) => {
    console.log(
      "API called successfully. Returned data: " + JSON.stringify(data)
    );
  })
  .catch((error: any) => console.error(error));

Instructions

First install the library and its dependencies and then save the example to example.ts and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"