Workload Protection 정책 다운로드
GET
https://api.datadoghq.com/api/v2/remote_config/products/cws/policy/downloadhttps://api.us3.datadoghq.com/api/v2/remote_config/products/cws/policy/downloadhttps://api.us5.datadoghq.com/api/v2/remote_config/products/cws/policy/downloadhttps://api.datadoghq.eu/api/v2/remote_config/products/cws/policy/downloadhttps://api.ap1.datadoghq.com/api/v2/remote_config/products/cws/policy/downloadhttps://api.ap2.datadoghq.com/api/v2/remote_config/products/cws/policy/downloadhttps://api.uk1.datadoghq.com/api/v2/remote_config/products/cws/policy/downloadhttps://api.ddog-gov.com/api/v2/remote_config/products/cws/policy/downloadhttps://api.us2.ddog-gov.com/api/v2/remote_config/products/cws/policy/download개요
다운로드 엔드포인트는 현재 활성화된 Workload Protection Agent 규칙에서 Workload Protection 정책 파일을 생성하며,
Workload Protection Agent 규칙을 .policy 파일로 다운로드합니다. 이 파일은 환경에서 실행 중인
정책을 업데이트하기 위해 Agent에 배포할 수 있습니다.
참고: 이 엔드포인트는 Government(US1-FED) 사이트에는 사용할 수 없습니다. 아래의 (US1-FED) 특정 리소스를 참조하세요.
응답
OK
Content type: application/zip
Not Authorized
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}코드 예시
Workload Protection 정책 다운로드
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/remote_config/products/cws/policy/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"Workload Protection 정책 다운로드
// Download the Workload Protection policy returns "OK" response
package main
import (
"context"
"fmt"
"io/ioutil"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewCSMThreatsApi(apiClient)
resp, r, err := api.DownloadCSMThreatsPolicy(ctx)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `CSMThreatsApi.DownloadCSMThreatsPolicy`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := ioutil.ReadAll(resp)
fmt.Fprintf(os.Stdout, "Response from `CSMThreatsApi.DownloadCSMThreatsPolicy`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"Workload Protection 정책 다운로드
// Download the Workload Protection policy returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.CsmThreatsApi;
import java.io.File;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
CsmThreatsApi apiInstance = new CsmThreatsApi(defaultClient);
try {
File result = apiInstance.downloadCSMThreatsPolicy();
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling CsmThreatsApi#downloadCSMThreatsPolicy");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"Workload Protection 정책 다운로드
"""
Download the Workload Protection policy returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.csm_threats_api import CSMThreatsApi
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = CSMThreatsApi(api_client)
response = api_instance.download_csm_threats_policy()
print(response.read())
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"Workload Protection 정책 다운로드
# Download the Workload Protection policy returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::CSMThreatsAPI.new
p api_instance.download_csm_threats_policy()
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"Workload Protection 정책 다운로드
// Download the Workload Protection policy returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_csm_threats::CSMThreatsAPI;
#[tokio::main]
async fn main() {
let configuration = datadog::Configuration::new();
let api = CSMThreatsAPI::with_config(configuration);
let resp = api.download_csm_threats_policy().await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runWorkload Protection 정책 다운로드
/**
* Download the Workload Protection policy returns "OK" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.CSMThreatsApi(configuration);
apiInstance
.downloadCSMThreatsPolicy()
.then((data: client.HttpFile) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"