RUM 보존 할당량 구성 생성 또는 업데이트
https://api.datadoghq.com/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}https://api.us3.datadoghq.com/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}https://api.us5.datadoghq.com/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}https://api.datadoghq.eu/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}https://api.ap1.datadoghq.com/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}https://api.ap2.datadoghq.com/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}https://api.uk1.datadoghq.com/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}https://api.ddog-gov.com/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}https://api.us2.ddog-gov.com/api/v2/rum/config/retention-quota/{scope_type}/{scope_id}개요
주어진 범위에 대한 RUM 보존 할당량 구성을 생성하거나 업데이트합니다. 요청이 성공하면 보존 할당량 구성 객체를 반환합니다.
인수
경로 파라미터
scope_type [required]The type of scope the retention quota configuration applies to.
application is the only supported scope type.
applicationapplicationscope_id [required]The identifier of the scope the retention quota configuration applies to.
For the application scope, this is the RUM application ID.
요청
Body Data (required)
생성하거나 업데이트할 RUM 보존 할당량 구성의 정의입니다.
data [required]RUM 보존 할당량 구성을 생성하거나 업데이트하기 위한 요청 본문입니다.
attributes [required]The RUM retention quota configuration properties to create or update.
customThe configuration used when mode is custom.
daily_reset_time [required]The time of day when the daily quota resets, in HH:MM 24-hour format.
daily_reset_timezone [required]The timezone offset used for the daily reset time, in ±HH:MM format.
quota_reached_action [required]The action to take when the session quota is reached.
stop, slowdownsession_limit [required]The maximum number of sessions allowed within the window. Must be at least 1000.
window_type [required]The window type over which the session limit is enforced.
dailymode [required]The retention quota mode. custom enforces a fixed session limit.
custom is the only supported mode.
customid [required]The identifier of the scope the retention quota configuration applies to.
Must match scope_id in the path.
type [required]The type of the resource, always rum_quota_config.
rum_quota_configrum_quota_config{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}응답
OK
The RUM retention quota configuration response.
data [required]The RUM retention quota configuration object.
attributes [required]The RUM retention quota configuration properties.
customThe configuration used when mode is custom.
daily_reset_time [required]The time of day when the daily quota resets, in HH:MM 24-hour format.
daily_reset_timezone [required]The timezone offset used for the daily reset time, in ±HH:MM format.
quota_reached_action [required]The action to take when the session quota is reached.
stop, slowdownsession_limit [required]The maximum number of sessions allowed within the window. Must be at least 1000.
window_type [required]The window type over which the session limit is enforced.
dailymode [required]The retention quota mode. custom enforces a fixed session limit.
custom is the only supported mode.
customorg_id [required]The ID of the organization the retention quota configuration belongs to.
updated_atThe date the retention quota configuration was last updated.
updated_byThe handle of the user who last updated the retention quota configuration.
id [required]The identifier of the scope the retention quota configuration applies to.
type [required]The type of the resource, always rum_quota_config.
rum_quota_configrum_quota_config{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom",
"org_id": 2,
"updated_at": "2026-03-04T15:37:54.951447Z",
"updated_by": "test@example.com"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}Bad Request
API error response.
errors [required]A list of errors.
detailA human-readable explanation specific to this occurrence of the error.
metaNon-standard meta-information about the error
sourceReferences to the source of the error.
headerA string indicating the name of a single request header which caused the error.
parameterA string indicating which URI query parameter caused the error.
pointerA JSON pointer to the value in the request document that caused the error.
statusStatus code of the response.
titleShort human-readable summary of the error.
{
"errors": [
{
"detail": "Missing required attribute in body",
"meta": {},
"source": {
"header": "Authorization",
"parameter": "limit",
"pointer": "/data/attributes/title"
},
"status": "400",
"title": "Bad Request"
}
]
}Unauthorized
API error response.
errors [required]A list of errors.
detailA human-readable explanation specific to this occurrence of the error.
metaNon-standard meta-information about the error
sourceReferences to the source of the error.
headerA string indicating the name of a single request header which caused the error.
parameterA string indicating which URI query parameter caused the error.
pointerA JSON pointer to the value in the request document that caused the error.
statusStatus code of the response.
titleShort human-readable summary of the error.
{
"errors": [
{
"detail": "Missing required attribute in body",
"meta": {},
"source": {
"header": "Authorization",
"parameter": "limit",
"pointer": "/data/attributes/title"
},
"status": "400",
"title": "Bad Request"
}
]
}Forbidden
API error response.
errors [required]A list of errors.
detailA human-readable explanation specific to this occurrence of the error.
metaNon-standard meta-information about the error
sourceReferences to the source of the error.
headerA string indicating the name of a single request header which caused the error.
parameterA string indicating which URI query parameter caused the error.
pointerA JSON pointer to the value in the request document that caused the error.
statusStatus code of the response.
titleShort human-readable summary of the error.
{
"errors": [
{
"detail": "Missing required attribute in body",
"meta": {},
"source": {
"header": "Authorization",
"parameter": "limit",
"pointer": "/data/attributes/title"
},
"status": "400",
"title": "Bad Request"
}
]
}Not Found
API error response.
errors [required]A list of errors.
detailA human-readable explanation specific to this occurrence of the error.
metaNon-standard meta-information about the error
sourceReferences to the source of the error.
headerA string indicating the name of a single request header which caused the error.
parameterA string indicating which URI query parameter caused the error.
pointerA JSON pointer to the value in the request document that caused the error.
statusStatus code of the response.
titleShort human-readable summary of the error.
{
"errors": [
{
"detail": "Missing required attribute in body",
"meta": {},
"source": {
"header": "Authorization",
"parameter": "limit",
"pointer": "/data/attributes/title"
},
"status": "400",
"title": "Bad Request"
}
]
}Too many requests
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}코드 예시
# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF# Path parameters
export scope_type="application"
export scope_id="cd73a516-a481-4af5-8352-9b577465c77b"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v2/rum/config/retention-quota/${scope_type}/${scope_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"data": {
"attributes": {
"custom": {
"daily_reset_time": "08:00",
"daily_reset_timezone": "+09:00",
"quota_reached_action": "stop",
"session_limit": 1000000,
"window_type": "daily"
},
"mode": "custom"
},
"id": "cd73a516-a481-4af5-8352-9b577465c77b",
"type": "rum_quota_config"
}
}
EOF// Create or update a RUM retention quota config returns "OK" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
body := datadogV2.RumRetentionQuotaConfigUpdateRequest{
Data: datadogV2.RumRetentionQuotaConfigUpdateData{
Attributes: datadogV2.RumRetentionQuotaConfigUpdateAttributes{
Custom: &datadogV2.RumRetentionQuotaCustomConfig{
DailyResetTime: "08:00",
DailyResetTimezone: "+09:00",
QuotaReachedAction: datadogV2.RUMRETENTIONQUOTAREACHEDACTION_STOP,
SessionLimit: 1000000,
WindowType: datadogV2.RUMRETENTIONQUOTAWINDOWTYPE_DAILY,
},
Mode: datadogV2.RUMRETENTIONQUOTAMODE_CUSTOM,
},
Id: "cd73a516-a481-4af5-8352-9b577465c77b",
Type: datadogV2.RUMRETENTIONQUOTACONFIGTYPE_RUM_QUOTA_CONFIG,
},
}
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewRUMRetentionQuotasApi(apiClient)
resp, r, err := api.UpsertRumQuotaConfig(ctx, datadogV2.RUMRETENTIONQUOTASCOPETYPE_APPLICATION, "cd73a516-a481-4af5-8352-9b577465c77b", body)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `RUMRetentionQuotasApi.UpsertRumQuotaConfig`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `RUMRetentionQuotasApi.UpsertRumQuotaConfig`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"// Create or update a RUM retention quota config returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.RumRetentionQuotasApi;
import com.datadog.api.client.v2.model.RumRetentionQuotaConfigResponse;
import com.datadog.api.client.v2.model.RumRetentionQuotaConfigType;
import com.datadog.api.client.v2.model.RumRetentionQuotaConfigUpdateAttributes;
import com.datadog.api.client.v2.model.RumRetentionQuotaConfigUpdateData;
import com.datadog.api.client.v2.model.RumRetentionQuotaConfigUpdateRequest;
import com.datadog.api.client.v2.model.RumRetentionQuotaCustomConfig;
import com.datadog.api.client.v2.model.RumRetentionQuotaMode;
import com.datadog.api.client.v2.model.RumRetentionQuotaReachedAction;
import com.datadog.api.client.v2.model.RumRetentionQuotaScopeType;
import com.datadog.api.client.v2.model.RumRetentionQuotaWindowType;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
RumRetentionQuotasApi apiInstance = new RumRetentionQuotasApi(defaultClient);
RumRetentionQuotaConfigUpdateRequest body =
new RumRetentionQuotaConfigUpdateRequest()
.data(
new RumRetentionQuotaConfigUpdateData()
.attributes(
new RumRetentionQuotaConfigUpdateAttributes()
.custom(
new RumRetentionQuotaCustomConfig()
.dailyResetTime("08:00")
.dailyResetTimezone("+09:00")
.quotaReachedAction(RumRetentionQuotaReachedAction.STOP)
.sessionLimit(1000000L)
.windowType(RumRetentionQuotaWindowType.DAILY))
.mode(RumRetentionQuotaMode.CUSTOM))
.id("cd73a516-a481-4af5-8352-9b577465c77b")
.type(RumRetentionQuotaConfigType.RUM_QUOTA_CONFIG));
try {
RumRetentionQuotaConfigResponse result =
apiInstance.upsertRumQuotaConfig(
RumRetentionQuotaScopeType.APPLICATION, "cd73a516-a481-4af5-8352-9b577465c77b", body);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling RumRetentionQuotasApi#upsertRumQuotaConfig");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java""""
Create or update a RUM retention quota config returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.rum_retention_quotas_api import RUMRetentionQuotasApi
from datadog_api_client.v2.model.rum_retention_quota_config_type import RumRetentionQuotaConfigType
from datadog_api_client.v2.model.rum_retention_quota_config_update_attributes import (
RumRetentionQuotaConfigUpdateAttributes,
)
from datadog_api_client.v2.model.rum_retention_quota_config_update_data import RumRetentionQuotaConfigUpdateData
from datadog_api_client.v2.model.rum_retention_quota_config_update_request import RumRetentionQuotaConfigUpdateRequest
from datadog_api_client.v2.model.rum_retention_quota_custom_config import RumRetentionQuotaCustomConfig
from datadog_api_client.v2.model.rum_retention_quota_mode import RumRetentionQuotaMode
from datadog_api_client.v2.model.rum_retention_quota_reached_action import RumRetentionQuotaReachedAction
from datadog_api_client.v2.model.rum_retention_quota_scope_type import RumRetentionQuotaScopeType
from datadog_api_client.v2.model.rum_retention_quota_window_type import RumRetentionQuotaWindowType
body = RumRetentionQuotaConfigUpdateRequest(
data=RumRetentionQuotaConfigUpdateData(
attributes=RumRetentionQuotaConfigUpdateAttributes(
custom=RumRetentionQuotaCustomConfig(
daily_reset_time="08:00",
daily_reset_timezone="+09:00",
quota_reached_action=RumRetentionQuotaReachedAction.STOP,
session_limit=1000000,
window_type=RumRetentionQuotaWindowType.DAILY,
),
mode=RumRetentionQuotaMode.CUSTOM,
),
id="cd73a516-a481-4af5-8352-9b577465c77b",
type=RumRetentionQuotaConfigType.RUM_QUOTA_CONFIG,
),
)
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = RUMRetentionQuotasApi(api_client)
response = api_instance.upsert_rum_quota_config(
scope_type=RumRetentionQuotaScopeType.APPLICATION, scope_id="cd73a516-a481-4af5-8352-9b577465c77b", body=body
)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"# Create or update a RUM retention quota config returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::RUMRetentionQuotasAPI.new
body = DatadogAPIClient::V2::RumRetentionQuotaConfigUpdateRequest.new({
data: DatadogAPIClient::V2::RumRetentionQuotaConfigUpdateData.new({
attributes: DatadogAPIClient::V2::RumRetentionQuotaConfigUpdateAttributes.new({
custom: DatadogAPIClient::V2::RumRetentionQuotaCustomConfig.new({
daily_reset_time: "08:00",
daily_reset_timezone: "+09:00",
quota_reached_action: DatadogAPIClient::V2::RumRetentionQuotaReachedAction::STOP,
session_limit: 1000000,
window_type: DatadogAPIClient::V2::RumRetentionQuotaWindowType::DAILY,
}),
mode: DatadogAPIClient::V2::RumRetentionQuotaMode::CUSTOM,
}),
id: "cd73a516-a481-4af5-8352-9b577465c77b",
type: DatadogAPIClient::V2::RumRetentionQuotaConfigType::RUM_QUOTA_CONFIG,
}),
})
p api_instance.upsert_rum_quota_config(RumRetentionQuotaScopeType::APPLICATION, "cd73a516-a481-4af5-8352-9b577465c77b", body)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"// Create or update a RUM retention quota config returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_rum_retention_quotas::RUMRetentionQuotasAPI;
use datadog_api_client::datadogV2::model::RumRetentionQuotaConfigType;
use datadog_api_client::datadogV2::model::RumRetentionQuotaConfigUpdateAttributes;
use datadog_api_client::datadogV2::model::RumRetentionQuotaConfigUpdateData;
use datadog_api_client::datadogV2::model::RumRetentionQuotaConfigUpdateRequest;
use datadog_api_client::datadogV2::model::RumRetentionQuotaCustomConfig;
use datadog_api_client::datadogV2::model::RumRetentionQuotaMode;
use datadog_api_client::datadogV2::model::RumRetentionQuotaReachedAction;
use datadog_api_client::datadogV2::model::RumRetentionQuotaScopeType;
use datadog_api_client::datadogV2::model::RumRetentionQuotaWindowType;
#[tokio::main]
async fn main() {
let body = RumRetentionQuotaConfigUpdateRequest::new(RumRetentionQuotaConfigUpdateData::new(
RumRetentionQuotaConfigUpdateAttributes::new(RumRetentionQuotaMode::CUSTOM).custom(
RumRetentionQuotaCustomConfig::new(
"08:00".to_string(),
"+09:00".to_string(),
RumRetentionQuotaReachedAction::STOP,
1000000,
RumRetentionQuotaWindowType::DAILY,
),
),
"cd73a516-a481-4af5-8352-9b577465c77b".to_string(),
RumRetentionQuotaConfigType::RUM_QUOTA_CONFIG,
));
let configuration = datadog::Configuration::new();
let api = RUMRetentionQuotasAPI::with_config(configuration);
let resp = api
.upsert_rum_quota_config(
RumRetentionQuotaScopeType::APPLICATION,
"cd73a516-a481-4af5-8352-9b577465c77b".to_string(),
body,
)
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run/**
* Create or update a RUM retention quota config returns "OK" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.RUMRetentionQuotasApi(configuration);
const params: v2.RUMRetentionQuotasApiUpsertRumQuotaConfigRequest = {
body: {
data: {
attributes: {
custom: {
dailyResetTime: "08:00",
dailyResetTimezone: "+09:00",
quotaReachedAction: "stop",
sessionLimit: 1000000,
windowType: "daily",
},
mode: "custom",
},
id: "cd73a516-a481-4af5-8352-9b577465c77b",
type: "rum_quota_config",
},
},
scopeType: "application",
scopeId: "cd73a516-a481-4af5-8352-9b577465c77b",
};
apiInstance
.upsertRumQuotaConfig(params)
.then((data: v2.RumRetentionQuotaConfigResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"