カスタム宛先を取得
GET
https://api.datadoghq.com/api/v2/logs/config/custom-destinations/{custom_destination_id}https://api.us3.datadoghq.com/api/v2/logs/config/custom-destinations/{custom_destination_id}https://api.us5.datadoghq.com/api/v2/logs/config/custom-destinations/{custom_destination_id}https://api.datadoghq.eu/api/v2/logs/config/custom-destinations/{custom_destination_id}https://api.ap1.datadoghq.com/api/v2/logs/config/custom-destinations/{custom_destination_id}https://api.ap2.datadoghq.com/api/v2/logs/config/custom-destinations/{custom_destination_id}https://api.uk1.datadoghq.com/api/v2/logs/config/custom-destinations/{custom_destination_id}https://api.ddog-gov.com/api/v2/logs/config/custom-destinations/{custom_destination_id}https://api.us2.ddog-gov.com/api/v2/logs/config/custom-destinations/{custom_destination_id}概要
組織内の特定のカスタム宛先を取得します。
引数
パスパラメーター
名前
タイプ
説明
custom_destination_id [required]string
The ID of the custom destination.
応答
OK
The custom destination.
フィールド
タイプ
説明
dataobject
The definition of a custom destination.
attributesobject
The attributes associated with the custom destination.
enabledboolean
Whether logs matching this custom destination should be forwarded or not.
trueforward_tagsboolean
Whether tags from the forwarded logs should be forwarded or not.
trueforward_tags_restriction_list[string]
List of keys of tags to be filtered.
An empty list represents no restriction is in place and either all or no tags will be
forwarded depending on forward_tags_restriction_list_type parameter.
forward_tags_restriction_list_typeenum
How forward_tags_restriction_list parameter should be interpreted.
If ALLOW_LIST, then only tags whose keys on the forwarded logs match the ones on the restriction list
are forwarded.
BLOCK_LIST works the opposite way. It does not forward the tags matching the ones on the list.
ALLOW_LISTAllowed enum values:
ALLOW_LIST, BLOCK_LISTforwarder_destination<oneOf>
A custom destination's location to forward logs.
<type=http>object
The HTTP destination.
auth [required]<oneOf>
Authentication method of the HTTP requests.
<type=basic>object
Basic access authentication.
type [required]enum
Type of the basic access authentication.
basicAllowed enum values:
basic<type=custom_header>object
Custom header access authentication.
header_name [required]string
The header name of the authentication.
type [required]enum
Type of the custom header access authentication.
custom_headerAllowed enum values:
custom_headerendpoint [required]string
The destination for which logs will be forwarded to. Must have HTTPS scheme and forwarding back to Datadog is not allowed.
type [required]enum
Type of the HTTP destination.
httpAllowed enum values:
http<type=splunk_hec>object
The Splunk HTTP Event Collector (HEC) destination.
endpoint [required]string
The destination for which logs will be forwarded to. Must have HTTPS scheme and forwarding back to Datadog is not allowed.
sourcetypestring
The Splunk sourcetype for the events sent to this Splunk destination.
If the field is absent from the request and no sourcetype has been previously set on this destination, the default sourcetype _json is used.
On update, if the field is absent from the request but a sourcetype was previously set, the previous value is kept.
If set to null, the sourcetype field is omitted from the forwarded event entirely.
Otherwise, the provided string value is used as the sourcetype.
type [required]enum
Type of the Splunk HTTP Event Collector (HEC) destination.
splunk_hecAllowed enum values:
splunk_hec<type=elasticsearch>object
The Elasticsearch destination.
auth [required]object
Basic access authentication.
<any-key>any
Basic access authentication.
endpoint [required]string
The destination for which logs will be forwarded to. Must have HTTPS scheme and forwarding back to Datadog is not allowed.
index_rotationstring
Date pattern with US locale and UTC timezone to be appended to the index name after adding -
(that is, ${index_name}-${indexPattern}).
You can customize the index rotation naming pattern by choosing one of these options:
- Hourly:
yyyy-MM-dd-HH(as an example, it would render:2022-10-19-09) - Daily:
yyyy-MM-dd(as an example, it would render:2022-10-19) - Weekly:
yyyy-'W'ww(as an example, it would render:2022-W42) - Monthly:
yyyy-MM(as an example, it would render:2022-10)
If this field is missing or is blank, it means that the index name will always be the same (that is, no rotation).
type [required]enum
Type of the Elasticsearch destination.
elasticsearchAllowed enum values:
elasticsearch<type=microsoft_sentinel>object
The Microsoft Sentinel destination.
client_id [required]string
Client ID from the Datadog Azure integration.
data_collection_endpoint [required]string
Azure data collection endpoint.
data_collection_rule_id [required]string
Azure data collection rule ID.
tenant_id [required]string
Tenant ID from the Datadog Azure integration.
type [required]enum
Type of the Microsoft Sentinel destination.
microsoft_sentinelAllowed enum values:
microsoft_sentinelnamestring
The custom destination name.
querystring
The custom destination query filter. Logs matching this query are forwarded to the destination.
""idstring
The custom destination ID.
typeenum
The type of the resource. The value should always be custom_destination.
custom_destinationAllowed enum values:
custom_destination{
"data": {
"attributes": {
"enabled": true,
"forward_tags": true,
"forward_tags_restriction_list": [
"datacenter",
"host"
],
"forward_tags_restriction_list_type": "ALLOW_LIST",
"forwarder_destination": {
"auth": {
"type": "basic"
},
"endpoint": "https://example.com",
"type": "http"
},
"name": "Nginx logs",
"query": "source:nginx"
},
"id": "be5d7a69-d0c8-4d4d-8ee8-bba292d98139",
"type": "custom_destination"
}
}Bad Request
API error response.
フィールド
タイプ
説明
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Forbidden
API error response.
フィールド
タイプ
説明
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Not Found
API error response.
フィールド
タイプ
説明
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
フィールド
タイプ
説明
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}コード例
カスタム宛先を取得
# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export custom_destination_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/logs/config/custom-destinations/${custom_destination_id}" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"カスタム宛先を取得
// Get a custom destination returns "OK" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
// there is a valid "custom_destination" in the system
CustomDestinationDataID := os.Getenv("CUSTOM_DESTINATION_DATA_ID")
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewLogsCustomDestinationsApi(apiClient)
resp, r, err := api.GetLogsCustomDestination(ctx, CustomDestinationDataID)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `LogsCustomDestinationsApi.GetLogsCustomDestination`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `LogsCustomDestinationsApi.GetLogsCustomDestination`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"カスタム宛先を取得
// Get a custom destination returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.LogsCustomDestinationsApi;
import com.datadog.api.client.v2.model.CustomDestinationResponse;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
LogsCustomDestinationsApi apiInstance = new LogsCustomDestinationsApi(defaultClient);
// there is a valid "custom_destination" in the system
String CUSTOM_DESTINATION_DATA_ID = System.getenv("CUSTOM_DESTINATION_DATA_ID");
try {
CustomDestinationResponse result =
apiInstance.getLogsCustomDestination(CUSTOM_DESTINATION_DATA_ID);
System.out.println(result);
} catch (ApiException e) {
System.err.println(
"Exception when calling LogsCustomDestinationsApi#getLogsCustomDestination");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"カスタム宛先を取得
"""
Get a custom destination returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.logs_custom_destinations_api import LogsCustomDestinationsApi
# there is a valid "custom_destination" in the system
CUSTOM_DESTINATION_DATA_ID = environ["CUSTOM_DESTINATION_DATA_ID"]
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = LogsCustomDestinationsApi(api_client)
response = api_instance.get_logs_custom_destination(
custom_destination_id=CUSTOM_DESTINATION_DATA_ID,
)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"カスタム宛先を取得
# Get a custom destination returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::LogsCustomDestinationsAPI.new
# there is a valid "custom_destination" in the system
CUSTOM_DESTINATION_DATA_ID = ENV["CUSTOM_DESTINATION_DATA_ID"]
p api_instance.get_logs_custom_destination(CUSTOM_DESTINATION_DATA_ID)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"カスタム宛先を取得
// Get a custom destination returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_logs_custom_destinations::LogsCustomDestinationsAPI;
#[tokio::main]
async fn main() {
// there is a valid "custom_destination" in the system
let custom_destination_data_id = std::env::var("CUSTOM_DESTINATION_DATA_ID").unwrap();
let configuration = datadog::Configuration::new();
let api = LogsCustomDestinationsAPI::with_config(configuration);
let resp = api
.get_logs_custom_destination(custom_destination_data_id.clone())
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runカスタム宛先を取得
/**
* Get a custom destination returns "OK" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.LogsCustomDestinationsApi(configuration);
// there is a valid "custom_destination" in the system
const CUSTOM_DESTINATION_DATA_ID = process.env
.CUSTOM_DESTINATION_DATA_ID as string;
const params: v2.LogsCustomDestinationsApiGetLogsCustomDestinationRequest = {
customDestinationId: CUSTOM_DESTINATION_DATA_ID,
};
apiInstance
.getLogsCustomDestination(params)
.then((data: v2.CustomDestinationResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"