모니터에 대한 활성 가동 중지 가져오기
https://api.datadoghq.com/api/v2/monitor/{monitor_id}/downtime_matcheshttps://api.us3.datadoghq.com/api/v2/monitor/{monitor_id}/downtime_matcheshttps://api.us5.datadoghq.com/api/v2/monitor/{monitor_id}/downtime_matcheshttps://api.datadoghq.eu/api/v2/monitor/{monitor_id}/downtime_matcheshttps://api.ap1.datadoghq.com/api/v2/monitor/{monitor_id}/downtime_matcheshttps://api.ap2.datadoghq.com/api/v2/monitor/{monitor_id}/downtime_matcheshttps://api.uk1.datadoghq.com/api/v2/monitor/{monitor_id}/downtime_matcheshttps://api.ddog-gov.com/api/v2/monitor/{monitor_id}/downtime_matcheshttps://api.us2.ddog-gov.com/api/v2/monitor/{monitor_id}/downtime_matches개요
지정된 모니터에 대한 모든 활성 가동 중지를 가져옵니다.
OAuth apps require the monitors_downtime authorization scope to access this endpoint.
인수
경로 파라미터
monitor_id [required]The id of the monitor.
쿼리 문자열
page[offset]Specific offset to use as the beginning of the returned page.
0page[limit]Maximum number of downtimes in the response.
30응답
OK
Response for retrieving all downtime matches for a monitor.
dataAn array of downtime matches.
attributesDowntime match details.
endThe end of the downtime.
groupsAn array of groups associated with the downtime.
startThe start of the downtime.
idThe downtime ID.
typeMonitor Downtime Match resource type.
downtime_matchdowntime_matchmetaPagination metadata returned by the API.
pageObject containing the total filtered count.
total_filtered_countTotal count of elements matched by the filter.
{
"data": [
{
"attributes": {
"end": "2020-01-02 03:04:00+00:00",
"groups": [
"service:postgres",
"team:frontend"
],
"scope": "env:(staging OR prod) AND datacenter:us-east-1",
"start": "2020-01-02 03:04:00+00:00"
},
"id": "00000000-0000-1234-0000-000000000000",
"type": "downtime_match"
}
],
"meta": {
"page": {
"total_filtered_count": "integer"
}
}
}Monitor Not Found error
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}코드 예시
# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/monitor/${monitor_id}/downtime_matches" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"// Get active downtimes for a monitor returns "OK" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewDowntimesApi(apiClient)
resp, r, err := api.ListMonitorDowntimes(ctx, 35534610, *datadogV2.NewListMonitorDowntimesOptionalParameters())
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `DowntimesApi.ListMonitorDowntimes`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `DowntimesApi.ListMonitorDowntimes`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"// Get active downtimes for a monitor returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.DowntimesApi;
import com.datadog.api.client.v2.model.MonitorDowntimeMatchResponse;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
DowntimesApi apiInstance = new DowntimesApi(defaultClient);
try {
MonitorDowntimeMatchResponse result = apiInstance.listMonitorDowntimes(35534610L);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling DowntimesApi#listMonitorDowntimes");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java""""
Get active downtimes for a monitor returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.downtimes_api import DowntimesApi
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = DowntimesApi(api_client)
response = api_instance.list_monitor_downtimes(
monitor_id=35534610,
)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"# Get active downtimes for a monitor returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::DowntimesAPI.new
p api_instance.list_monitor_downtimes(35534610)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"// Get active downtimes for a monitor returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_downtimes::DowntimesAPI;
use datadog_api_client::datadogV2::api_downtimes::ListMonitorDowntimesOptionalParams;
#[tokio::main]
async fn main() {
let configuration = datadog::Configuration::new();
let api = DowntimesAPI::with_config(configuration);
let resp = api
.list_monitor_downtimes(35534610, ListMonitorDowntimesOptionalParams::default())
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run/**
* Get active downtimes for a monitor returns "OK" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.DowntimesApi(configuration);
const params: v2.DowntimesApiListMonitorDowntimesRequest = {
monitorId: 35534610,
};
apiInstance
.listMonitorDowntimes(params)
.then((data: v2.MonitorDowntimeMatchResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"https://api.datadoghq.com/api/v1/monitor/{monitor_id}/downtimeshttps://api.us3.datadoghq.com/api/v1/monitor/{monitor_id}/downtimeshttps://api.us5.datadoghq.com/api/v1/monitor/{monitor_id}/downtimeshttps://api.datadoghq.eu/api/v1/monitor/{monitor_id}/downtimeshttps://api.ap1.datadoghq.com/api/v1/monitor/{monitor_id}/downtimeshttps://api.ap2.datadoghq.com/api/v1/monitor/{monitor_id}/downtimeshttps://api.uk1.datadoghq.com/api/v1/monitor/{monitor_id}/downtimeshttps://api.ddog-gov.com/api/v1/monitor/{monitor_id}/downtimeshttps://api.us2.ddog-gov.com/api/v1/monitor/{monitor_id}/downtimes개요
지정된 모니터에 대한 모든 활성 v1 가동 중지를 가져옵니다. 참고: 이 엔드포인트는 지원이 중단되었습니다. v2 엔드포인트를 사용하세요.
OAuth apps require the monitors_read authorization scope to access this endpoint.
인수
경로 파라미터
monitor_id [required]The id of the monitor
응답
OK
activeIf a scheduled downtime currently exists.
active_childThe downtime object definition of the active child for the original parent recurring downtime. This field will only exist on recurring downtimes.
activeIf a scheduled downtime currently exists.
canceledIf a scheduled downtime is canceled.
creator_idUser ID of the downtime creator.
disabledIf a downtime has been disabled.
downtime_type0 for a downtime applied on * or all,
1 when the downtime is only scoped to hosts,
or 2 when the downtime is scoped to anything but hosts.
endPOSIX timestamp to end the downtime. If not provided, the downtime is in effect indefinitely until you cancel it.
idThe downtime ID.
messageA message to include with notifications for this downtime.
Email notifications can be sent to specific users by using the same @username notation as events.
monitor_idA single monitor to which the downtime applies. If not provided, the downtime applies to all monitors.
monitor_tagsA comma-separated list of monitor tags. For example, tags that are applied directly to monitors,
not tags that are used in monitor queries (which are filtered by the scope parameter), to which the downtime applies.
The resulting downtime applies to monitors that match ALL provided monitor tags.
For example, service:postgres AND team:frontend.
mute_first_recovery_notificationIf the first recovery notification during a downtime should be muted.
notify_end_statesStates for which notify_end_types sends out notifications for.
notify_end_typesIf set, notifies if a monitor is in an alert-worthy state (ALERT, WARNING, or NO DATA)
when this downtime expires or is canceled. Applied to monitors that change states during
the downtime (such as from OK to ALERT, WARNING, or NO DATA), and to monitors that
already have an alert-worthy state when downtime begins.
parent_idID of the parent Downtime.
recurrenceAn object defining the recurrence of the downtime.
periodHow often to repeat as an integer.
For example, to repeat every 3 days, select a type of days and a period of 3.
rruleThe RRULE standard for defining recurring events (requires to set "type" to rrule)
For example, to have a recurring event on the first day of each month, set the type to rrule and set the FREQ to MONTHLY and BYMONTHDAY to 1.
Most common rrule options from the iCalendar Spec are supported.
Note: Attributes specifying the duration in RRULE are not supported (for example, DTSTART, DTEND, DURATION).
More examples available in this downtime guide
typeThe type of recurrence. Choose from days, weeks, months, years, rrule.
until_dateThe date at which the recurrence should end as a POSIX timestamp.
until_occurences and until_date are mutually exclusive.
until_occurrencesHow many times the downtime is rescheduled.
until_occurences and until_date are mutually exclusive.
week_daysA list of week days to repeat on. Choose from Mon, Tue, Wed, Thu, Fri, Sat or Sun.
Only applicable when type is weeks. First letter must be capitalized.
scopeThe scope(s) to which the downtime applies and must be in key:value format. For example, host:app2.
Provide multiple scopes as a comma-separated list like env:dev,env:prod.
The resulting downtime applies to sources that matches ALL provided scopes (env:dev AND env:prod).
startPOSIX timestamp to start the downtime. If not provided, the downtime starts the moment it is created.
timezoneThe timezone in which to display the downtime's start and end times in Datadog applications.
updater_idID of the last user that updated the downtime.
canceledIf a scheduled downtime is canceled.
creator_idUser ID of the downtime creator.
disabledIf a downtime has been disabled.
downtime_type0 for a downtime applied on * or all,
1 when the downtime is only scoped to hosts,
or 2 when the downtime is scoped to anything but hosts.
endPOSIX timestamp to end the downtime. If not provided, the downtime is in effect indefinitely until you cancel it.
idThe downtime ID.
messageA message to include with notifications for this downtime.
Email notifications can be sent to specific users by using the same @username notation as events.
monitor_idA single monitor to which the downtime applies. If not provided, the downtime applies to all monitors.
monitor_tagsA comma-separated list of monitor tags. For example, tags that are applied directly to monitors,
not tags that are used in monitor queries (which are filtered by the scope parameter), to which the downtime applies.
The resulting downtime applies to monitors that match ALL provided monitor tags.
For example, service:postgres AND team:frontend.
mute_first_recovery_notificationIf the first recovery notification during a downtime should be muted.
notify_end_statesStates for which notify_end_types sends out notifications for.
notify_end_typesIf set, notifies if a monitor is in an alert-worthy state (ALERT, WARNING, or NO DATA)
when this downtime expires or is canceled. Applied to monitors that change states during
the downtime (such as from OK to ALERT, WARNING, or NO DATA), and to monitors that
already have an alert-worthy state when downtime begins.
parent_idID of the parent Downtime.
recurrenceAn object defining the recurrence of the downtime.
periodHow often to repeat as an integer.
For example, to repeat every 3 days, select a type of days and a period of 3.
rruleThe RRULE standard for defining recurring events (requires to set "type" to rrule)
For example, to have a recurring event on the first day of each month, set the type to rrule and set the FREQ to MONTHLY and BYMONTHDAY to 1.
Most common rrule options from the iCalendar Spec are supported.
Note: Attributes specifying the duration in RRULE are not supported (for example, DTSTART, DTEND, DURATION).
More examples available in this downtime guide
typeThe type of recurrence. Choose from days, weeks, months, years, rrule.
until_dateThe date at which the recurrence should end as a POSIX timestamp.
until_occurences and until_date are mutually exclusive.
until_occurrencesHow many times the downtime is rescheduled.
until_occurences and until_date are mutually exclusive.
week_daysA list of week days to repeat on. Choose from Mon, Tue, Wed, Thu, Fri, Sat or Sun.
Only applicable when type is weeks. First letter must be capitalized.
scopeThe scope(s) to which the downtime applies and must be in key:value format. For example, host:app2.
Provide multiple scopes as a comma-separated list like env:dev,env:prod.
The resulting downtime applies to sources that matches ALL provided scopes (env:dev AND env:prod).
startPOSIX timestamp to start the downtime. If not provided, the downtime starts the moment it is created.
timezoneThe timezone in which to display the downtime's start and end times in Datadog applications.
updater_idID of the last user that updated the downtime.
{
"active": true,
"active_child": {
"active": true,
"canceled": 1412799983,
"creator_id": 123456,
"disabled": false,
"downtime_type": 2,
"end": 1412793983,
"id": 1626,
"message": "Message on the downtime",
"monitor_id": 123456,
"monitor_tags": [
"*"
],
"mute_first_recovery_notification": false,
"notify_end_states": [
"alert",
"no data",
"warn"
],
"notify_end_types": [
"canceled",
"expired"
],
"parent_id": 123,
"recurrence": {
"period": 1,
"rrule": "FREQ=MONTHLY;BYSETPOS=3;BYDAY=WE;INTERVAL=1",
"type": "weeks",
"until_date": 1447786293,
"until_occurrences": 2,
"week_days": [
"Mon",
"Tue"
]
},
"scope": [
"env:staging"
],
"start": 1412792983,
"timezone": "America/New_York",
"updater_id": 123456
},
"canceled": 1412799983,
"creator_id": 123456,
"disabled": false,
"downtime_type": 2,
"end": 1412793983,
"id": 1625,
"message": "Message on the downtime",
"monitor_id": 123456,
"monitor_tags": [
"*"
],
"mute_first_recovery_notification": false,
"notify_end_states": [
"alert",
"no data",
"warn"
],
"notify_end_types": [
"canceled",
"expired"
],
"parent_id": 123,
"recurrence": {
"period": 1,
"rrule": "FREQ=MONTHLY;BYSETPOS=3;BYDAY=WE;INTERVAL=1",
"type": "weeks",
"until_date": 1447786293,
"until_occurrences": 2,
"week_days": [
"Mon",
"Tue"
]
},
"scope": [
"env:staging"
],
"start": 1412792983,
"timezone": "America/New_York",
"updater_id": 123456
}Bad Request
Error response object.
errors [required]Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Monitor Not Found error
Error response object.
errors [required]Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Too many requests
Error response object.
errors [required]Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}코드 예시
# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export monitor_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v1/monitor/${monitor_id}/downtimes" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"// Get active downtimes for a monitor returns "OK" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV1"
)
func main() {
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV1.NewDowntimesApi(apiClient)
resp, r, err := api.ListMonitorDowntimes(ctx, 9223372036854775807)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `DowntimesApi.ListMonitorDowntimes`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `DowntimesApi.ListMonitorDowntimes`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"// Get active downtimes for a monitor returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v1.api.DowntimesApi;
import com.datadog.api.client.v1.model.Downtime;
import java.util.List;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
DowntimesApi apiInstance = new DowntimesApi(defaultClient);
try {
List<Downtime> result = apiInstance.listMonitorDowntimes(9223372036854775807L);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling DowntimesApi#listMonitorDowntimes");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java""""
Get active downtimes for a monitor returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v1.api.downtimes_api import DowntimesApi
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = DowntimesApi(api_client)
response = api_instance.list_monitor_downtimes(
monitor_id=9223372036854775807,
)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"# Get active downtimes for a monitor returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V1::DowntimesAPI.new
p api_instance.list_monitor_downtimes(9223372036854775807)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"// Get active downtimes for a monitor returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV1::api_downtimes::DowntimesAPI;
#[tokio::main]
async fn main() {
let configuration = datadog::Configuration::new();
let api = DowntimesAPI::with_config(configuration);
let resp = api.list_monitor_downtimes(9223372036854775807).await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run/**
* Get active downtimes for a monitor returns "OK" response
*/
import { client, v1 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v1.DowntimesApi(configuration);
const params: v1.DowntimesApiListMonitorDowntimesRequest = {
monitorId: 9223372036854775807,
};
apiInstance
.listMonitorDowntimes(params)
.then((data: v1.Downtime[]) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"