Governance Console 구성 가져오기 - Governance Console

경고Note: This endpoint is in preview and is subject to change. If you have any feedback, contact Datadog support.

GEThttps://api.datadoghq.com/api/v2/governance/confighttps://api.us3.datadoghq.com/api/v2/governance/confighttps://api.us5.datadoghq.com/api/v2/governance/confighttps://api.datadoghq.eu/api/v2/governance/confighttps://api.ap1.datadoghq.com/api/v2/governance/confighttps://api.ap2.datadoghq.com/api/v2/governance/confighttps://api.uk1.datadoghq.com/api/v2/governance/confighttps://api.ddog-gov.com/api/v2/governance/confighttps://api.us2.ddog-gov.com/api/v2/governance/config

개요

조직에 대해 Governance Console 구성을 조회하며, 여기에는 Console이 활성화되어 있는지, 할당 알림이 활성화되어 있는지, 사용 속성 구성이 되어 있는지가 포함됩니다.

응답

The Governance Console configuration for an organization.

항목

유형

설명

data [required]

object

A Governance Console configuration resource.

{
  "data": {
    "attributes": {
      "assignment_notifications_enabled": true,
      "enabled": true,
      "usage_attribution_configured": true,
      "xorg_insights_enabled": true
    },
    "id": "00000000-0000-0000-0000-000000000000",
    "type": "governance_console_config"
  }
}

Bad Request

API error response.

항목

유형

설명

errors [required]

[object]

A list of errors.

{
  "errors": [
    {
      "detail": "Missing required attribute in body",
      "meta": {},
      "source": {
        "header": "Authorization",
        "parameter": "limit",
        "pointer": "/data/attributes/title"
      },
      "status": "400",
      "title": "Bad Request"
    }
  ]
}

Unauthorized

API error response.

항목

유형

설명

errors [required]

[object]

A list of errors.

{
  "errors": [
    {
      "detail": "Missing required attribute in body",
      "meta": {},
      "source": {
        "header": "Authorization",
        "parameter": "limit",
        "pointer": "/data/attributes/title"
      },
      "status": "400",
      "title": "Bad Request"
    }
  ]
}

Forbidden

API error response.

항목

유형

설명

errors [required]

[object]

A list of errors.

{
  "errors": [
    {
      "detail": "Missing required attribute in body",
      "meta": {},
      "source": {
        "header": "Authorization",
        "parameter": "limit",
        "pointer": "/data/attributes/title"
      },
      "status": "400",
      "title": "Bad Request"
    }
  ]
}

Too many requests

API error response.

항목

유형

설명

errors [required]

[string]

A list of errors.

{
  "errors": [
    "Bad Request"
  ]
}

코드 예시

Governance Console 구성 가져오기

# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"

curl -X GET "https://api.${DD_SITE}/api/v2/governance/config" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"

Governance Console 구성 가져오기

// Get the Governance Console configuration returns "OK" response

package main

import (
	"context"
	"encoding/json"
	"fmt"
	"os"

	"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
	"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)

func main() {
	ctx := datadog.NewDefaultContext(context.Background())
	ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
	configuration := datadog.NewConfiguration()
	configuration.SetUnstableOperationEnabled("v2.GetGovernanceConfig", true)
	apiClient := datadog.NewAPIClient(configuration)
	api := datadogV2.NewGovernanceConsoleApi(apiClient)
	resp, r, err := api.GetGovernanceConfig(ctx)

	if err != nil {
		fmt.Fprintf(os.Stderr, "Error when calling `GovernanceConsoleApi.GetGovernanceConfig`: %v\n", err)
		fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
	}

	responseContent, _ := json.MarshalIndent(resp, "", "  ")
	fmt.Fprintf(os.Stdout, "Response from `GovernanceConsoleApi.GetGovernanceConfig`:\n%s\n", responseContent)
}

Instructions

First install the library and its dependencies and then save the example to main.go and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"

Governance Console 구성 가져오기

// Get the Governance Console configuration returns "OK" response

import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.GovernanceConsoleApi;
import com.datadog.api.client.v2.model.GovernanceConfigResponse;

public class Example {
  public static void main(String[] args) {
    ApiClient defaultClient = ApiClient.getDefaultApiClient();
    defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
    defaultClient.setUnstableOperationEnabled("v2.getGovernanceConfig", true);
    GovernanceConsoleApi apiInstance = new GovernanceConsoleApi(defaultClient);

    try {
      GovernanceConfigResponse result = apiInstance.getGovernanceConfig();
      System.out.println(result);
    } catch (ApiException e) {
      System.err.println("Exception when calling GovernanceConsoleApi#getGovernanceConfig");
      System.err.println("Status code: " + e.getCode());
      System.err.println("Reason: " + e.getResponseBody());
      System.err.println("Response headers: " + e.getResponseHeaders());
      e.printStackTrace();
    }
  }
}

Instructions

First install the library and its dependencies and then save the example to Example.java and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"

Governance Console 구성 가져오기

"""
Get the Governance Console configuration returns "OK" response
"""

from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.governance_console_api import GovernanceConsoleApi

configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
configuration.unstable_operations["get_governance_config"] = True
with ApiClient(configuration) as api_client:
    api_instance = GovernanceConsoleApi(api_client)
    response = api_instance.get_governance_config()

    print(response)

Instructions

First install the library and its dependencies and then save the example to example.py and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"

Governance Console 구성 가져오기

# Get the Governance Console configuration returns "OK" response

require "datadog_api_client"
DatadogAPIClient.configure do |config|
  config.access_token = ENV["DD_BEARER_TOKEN"]
  config.unstable_operations["v2.get_governance_config".to_sym] = true
end
api_instance = DatadogAPIClient::V2::GovernanceConsoleAPI.new
p api_instance.get_governance_config()

Instructions

First install the library and its dependencies and then save the example to example.rb and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"

Governance Console 구성 가져오기

// Get the Governance Console configuration returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_governance_console::GovernanceConsoleAPI;

#[tokio::main]
async fn main() {
    let mut configuration = datadog::Configuration::new();
    configuration.set_unstable_operation_enabled("v2.get_governance_config", true);
    let api = GovernanceConsoleAPI::with_config(configuration);
    let resp = api.get_governance_config().await;
    if let Ok(value) = resp {
        println!("{:#?}", value);
    } else {
        println!("{:#?}", resp.unwrap_err());
    }
}

Instructions

First install the library and its dependencies and then save the example to src/main.rs and run following commands:

DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

DD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run

Governance Console 구성 가져오기

/**
 * Get the Governance Console configuration returns "OK" response
 */

import { client, v2 } from "@datadog/datadog-api-client";

const configuration = client.createConfiguration({
  authMethods: {
    AuthZ: {
      accessToken: process.env.DD_BEARER_TOKEN as string,
    },
  },
});
configuration.unstableOperations["v2.getGovernanceConfig"] = true;
const apiInstance = new v2.GovernanceConsoleApi(configuration);

apiInstance
  .getGovernanceConfig()
  .then((data: v2.GovernanceConfigResponse) => {
    console.log(
      "API called successfully. Returned data: " + JSON.stringify(data)
    );
  })
  .catch((error: any) => console.error(error));

Instructions

First install the library and its dependencies and then save the example to example.ts and run following commands:

DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"

DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"