IP 허용 목록 받기
GET
https://api.datadoghq.com/api/v2/ip_allowlisthttps://api.us3.datadoghq.com/api/v2/ip_allowlisthttps://api.us5.datadoghq.com/api/v2/ip_allowlisthttps://api.datadoghq.eu/api/v2/ip_allowlisthttps://api.ap1.datadoghq.com/api/v2/ip_allowlisthttps://api.ap2.datadoghq.com/api/v2/ip_allowlisthttps://api.uk1.datadoghq.com/api/v2/ip_allowlisthttps://api.ddog-gov.com/api/v2/ip_allowlisthttps://api.us2.ddog-gov.com/api/v2/ip_allowlist개요
IP 허용 목록과 해당 활성화 또는 비활성화 상태를 반환합니다.
OAuth apps require the org_management authorization scope to access this endpoint.
응답
OK
Response containing information about the IP allowlist.
항목
유형
설명
dataobject
IP allowlist data.
attributesobject
Attributes of the IP allowlist.
enabledboolean
Whether the IP allowlist logic is enabled or not.
entries[object]
Array of entries in the IP allowlist.
data [required]object
Data of the IP allowlist entry object.
attributesobject
Attributes of the IP allowlist entry.
cidr_blockstring
The CIDR block describing the IP range of the entry.
created_atdate-time
Creation time of the entry.
modified_atdate-time
Time of last entry modification.
notestring
A note describing the IP allowlist entry.
idstring
The unique identifier of the IP allowlist entry.
type [required]enum
IP allowlist Entry type.
ip_allowlist_entryAllowed enum values:
ip_allowlist_entryidstring
The unique identifier of the org.
type [required]enum
IP allowlist type.
ip_allowlistAllowed enum values:
ip_allowlist{
"data": {
"attributes": {
"enabled": false,
"entries": [
{
"data": {
"attributes": {
"cidr_block": "string",
"created_at": "2019-09-19T10:00:00.000Z",
"modified_at": "2019-09-19T10:00:00.000Z",
"note": "string"
},
"id": "string",
"type": "ip_allowlist_entry"
}
}
]
},
"id": "string",
"type": "ip_allowlist"
}
}Forbidden
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Not Found
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}코드 예시
IP 허용 목록 받기
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/ip_allowlist" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"IP 허용 목록 받기
// Get IP Allowlist returns "OK" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewIPAllowlistApi(apiClient)
resp, r, err := api.GetIPAllowlist(ctx)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `IPAllowlistApi.GetIPAllowlist`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `IPAllowlistApi.GetIPAllowlist`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"IP 허용 목록 받기
// Get IP Allowlist returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.IpAllowlistApi;
import com.datadog.api.client.v2.model.IPAllowlistResponse;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
IpAllowlistApi apiInstance = new IpAllowlistApi(defaultClient);
try {
IPAllowlistResponse result = apiInstance.getIPAllowlist();
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling IpAllowlistApi#getIPAllowlist");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"IP 허용 목록 받기
"""
Get IP Allowlist returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.ip_allowlist_api import IPAllowlistApi
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = IPAllowlistApi(api_client)
response = api_instance.get_ip_allowlist()
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"IP 허용 목록 받기
# Get IP Allowlist returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::IPAllowlistAPI.new
p api_instance.get_ip_allowlist()
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"IP 허용 목록 받기
// Get IP Allowlist returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_ip_allowlist::IPAllowlistAPI;
#[tokio::main]
async fn main() {
let configuration = datadog::Configuration::new();
let api = IPAllowlistAPI::with_config(configuration);
let resp = api.get_ip_allowlist().await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runIP 허용 목록 받기
/**
* Get IP Allowlist returns "OK" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.IPAllowlistApi(configuration);
apiInstance
.getIPAllowlist()
.then((data: v2.IPAllowlistResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"