검사 그룹 삭제
https://api.datadoghq.com/api/v2/sensitive-data-scanner/config/groups/{group_id}https://api.us3.datadoghq.com/api/v2/sensitive-data-scanner/config/groups/{group_id}https://api.us5.datadoghq.com/api/v2/sensitive-data-scanner/config/groups/{group_id}https://api.datadoghq.eu/api/v2/sensitive-data-scanner/config/groups/{group_id}https://api.ap1.datadoghq.com/api/v2/sensitive-data-scanner/config/groups/{group_id}https://api.ap2.datadoghq.com/api/v2/sensitive-data-scanner/config/groups/{group_id}https://api.uk1.datadoghq.com/api/v2/sensitive-data-scanner/config/groups/{group_id}https://api.ddog-gov.com/api/v2/sensitive-data-scanner/config/groups/{group_id}https://api.us2.ddog-gov.com/api/v2/sensitive-data-scanner/config/groups/{group_id}개요
지정된 그룹을 삭제합니다.
인수
경로 파라미터
group_id [required]The ID of a group of rules.
요청
Body Data (required)
meta [required]그룹 삭제 요청입니다.
versionVersion of the API (optional).
{
"meta": {}
}응답
OK
Delete group response.
metaMeta payload containing information about the API.
versionVersion of the API (optional).
{
"meta": {
"version": 0
}
}Bad Request
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}Authentication Error
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}Not Found
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}코드 예시
# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF# Path parameters
export group_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X DELETE "https://api.${DD_SITE}/api/v2/sensitive-data-scanner/config/groups/${group_id}" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"meta": {}
}
EOF// Delete Scanning Group returns "OK" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
// there is a valid "scanning_group" in the system
GroupDataID := os.Getenv("GROUP_DATA_ID")
body := datadogV2.SensitiveDataScannerGroupDeleteRequest{
Meta: datadogV2.SensitiveDataScannerMetaVersionOnly{},
}
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewSensitiveDataScannerApi(apiClient)
resp, r, err := api.DeleteScanningGroup(ctx, GroupDataID, body)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `SensitiveDataScannerApi.DeleteScanningGroup`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `SensitiveDataScannerApi.DeleteScanningGroup`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"// Delete Scanning Group returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.SensitiveDataScannerApi;
import com.datadog.api.client.v2.model.SensitiveDataScannerGroupDeleteRequest;
import com.datadog.api.client.v2.model.SensitiveDataScannerGroupDeleteResponse;
import com.datadog.api.client.v2.model.SensitiveDataScannerMetaVersionOnly;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
SensitiveDataScannerApi apiInstance = new SensitiveDataScannerApi(defaultClient);
// there is a valid "scanning_group" in the system
String GROUP_DATA_ID = System.getenv("GROUP_DATA_ID");
SensitiveDataScannerGroupDeleteRequest body =
new SensitiveDataScannerGroupDeleteRequest()
.meta(new SensitiveDataScannerMetaVersionOnly());
try {
SensitiveDataScannerGroupDeleteResponse result =
apiInstance.deleteScanningGroup(GROUP_DATA_ID, body);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling SensitiveDataScannerApi#deleteScanningGroup");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java""""
Delete Scanning Group returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.sensitive_data_scanner_api import SensitiveDataScannerApi
from datadog_api_client.v2.model.sensitive_data_scanner_group_delete_request import (
SensitiveDataScannerGroupDeleteRequest,
)
from datadog_api_client.v2.model.sensitive_data_scanner_meta_version_only import SensitiveDataScannerMetaVersionOnly
# there is a valid "scanning_group" in the system
GROUP_DATA_ID = environ["GROUP_DATA_ID"]
body = SensitiveDataScannerGroupDeleteRequest(
meta=SensitiveDataScannerMetaVersionOnly(),
)
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = SensitiveDataScannerApi(api_client)
response = api_instance.delete_scanning_group(group_id=GROUP_DATA_ID, body=body)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"# Delete Scanning Group returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::SensitiveDataScannerAPI.new
# there is a valid "scanning_group" in the system
GROUP_DATA_ID = ENV["GROUP_DATA_ID"]
body = DatadogAPIClient::V2::SensitiveDataScannerGroupDeleteRequest.new({
meta: DatadogAPIClient::V2::SensitiveDataScannerMetaVersionOnly.new({}),
})
p api_instance.delete_scanning_group(GROUP_DATA_ID, body)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"// Delete Scanning Group returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_sensitive_data_scanner::SensitiveDataScannerAPI;
use datadog_api_client::datadogV2::model::SensitiveDataScannerGroupDeleteRequest;
use datadog_api_client::datadogV2::model::SensitiveDataScannerMetaVersionOnly;
#[tokio::main]
async fn main() {
// there is a valid "scanning_group" in the system
let group_data_id = std::env::var("GROUP_DATA_ID").unwrap();
let body =
SensitiveDataScannerGroupDeleteRequest::new(SensitiveDataScannerMetaVersionOnly::new());
let configuration = datadog::Configuration::new();
let api = SensitiveDataScannerAPI::with_config(configuration);
let resp = api.delete_scanning_group(group_data_id.clone(), body).await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<API-KEY>" DD_APP_KEY="<APP-KEY>" cargo run/**
* Delete Scanning Group returns "OK" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.SensitiveDataScannerApi(configuration);
// there is a valid "scanning_group" in the system
const GROUP_DATA_ID = process.env.GROUP_DATA_ID as string;
const params: v2.SensitiveDataScannerApiDeleteScanningGroupRequest = {
body: {
meta: {},
},
groupId: GROUP_DATA_ID,
};
apiInstance
.deleteScanningGroup(params)
.then((data: v2.SensitiveDataScannerGroupDeleteResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"