SLO 보고서 가져오기
경고Note: This feature is in private beta and is no longer accepting requests for access.
GET
https://api.datadoghq.com/api/v2/slo/report/{report_id}/downloadhttps://api.us3.datadoghq.com/api/v2/slo/report/{report_id}/downloadhttps://api.us5.datadoghq.com/api/v2/slo/report/{report_id}/downloadhttps://api.datadoghq.eu/api/v2/slo/report/{report_id}/downloadhttps://api.ap1.datadoghq.com/api/v2/slo/report/{report_id}/downloadhttps://api.ap2.datadoghq.com/api/v2/slo/report/{report_id}/downloadhttps://api.uk1.datadoghq.com/api/v2/slo/report/{report_id}/downloadhttps://api.ddog-gov.com/api/v2/slo/report/{report_id}/downloadhttps://api.us2.ddog-gov.com/api/v2/slo/report/{report_id}/download개요
SLO 보고서를 다운로드합니다. 이는 보고서 작업이 완료된 후에만 수행할 수 있습니다.
보고서가 무기한 존재한다고 보장하지 않습니다. 보고서를 사용할 수 있게 되면 즉시 다운로드하는 것이 좋습니다.
OAuth apps require the slos_read authorization scope to access this endpoint.
인수
경로 파라미터
이름
유형
설명
report_id [required]string
The ID of the report job.
응답
OK
Content type: text/csv
slo_name,slo_id,sli,error_budget_remaining
My SLO,abc-123,99.95,99.5Bad Request
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Forbidden
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Not Found
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
항목
유형
설명
errors [required][string]
A list of errors.
{
"errors": [
"Bad Request"
]
}코드 예시
SLO 보고서 가져오기
# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Path parameters
export report_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/slo/report/${report_id}/download" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"SLO 보고서 가져오기
// Get SLO report returns "OK" response
package main
import (
"context"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
configuration.SetUnstableOperationEnabled("v2.GetSLOReport", true)
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewServiceLevelObjectivesApi(apiClient)
resp, r, err := api.GetSLOReport(ctx, "9fb2dc2a-ead0-11ee-a174-9fe3a9d7627f")
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `ServiceLevelObjectivesApi.GetSLOReport`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
fmt.Fprintf(os.Stdout, "Response from `ServiceLevelObjectivesApi.GetSLOReport`:\n%s\n", resp)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"SLO 보고서 가져오기
// Get SLO report returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.ServiceLevelObjectivesApi;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
defaultClient.setUnstableOperationEnabled("v2.getSLOReport", true);
ServiceLevelObjectivesApi apiInstance = new ServiceLevelObjectivesApi(defaultClient);
try {
String result = apiInstance.getSLOReport("9fb2dc2a-ead0-11ee-a174-9fe3a9d7627f");
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling ServiceLevelObjectivesApi#getSLOReport");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"SLO 보고서 가져오기
"""
Get SLO report returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.service_level_objectives_api import ServiceLevelObjectivesApi
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
configuration.unstable_operations["get_slo_report"] = True
with ApiClient(configuration) as api_client:
api_instance = ServiceLevelObjectivesApi(api_client)
response = api_instance.get_slo_report(
report_id="9fb2dc2a-ead0-11ee-a174-9fe3a9d7627f",
)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"SLO 보고서 가져오기
# Get SLO report returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
config.unstable_operations["v2.get_slo_report".to_sym] = true
end
api_instance = DatadogAPIClient::V2::ServiceLevelObjectivesAPI.new
p api_instance.get_slo_report("9fb2dc2a-ead0-11ee-a174-9fe3a9d7627f")
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"SLO 보고서 가져오기
// Get SLO report returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_service_level_objectives::ServiceLevelObjectivesAPI;
#[tokio::main]
async fn main() {
let mut configuration = datadog::Configuration::new();
configuration.set_unstable_operation_enabled("v2.get_slo_report", true);
let api = ServiceLevelObjectivesAPI::with_config(configuration);
let resp = api
.get_slo_report("9fb2dc2a-ead0-11ee-a174-9fe3a9d7627f".to_string())
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runSLO 보고서 가져오기
/**
* Get SLO report returns "OK" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
configuration.unstableOperations["v2.getSLOReport"] = true;
const apiInstance = new v2.ServiceLevelObjectivesApi(configuration);
const params: v2.ServiceLevelObjectivesApiGetSLOReportRequest = {
reportId: "9fb2dc2a-ead0-11ee-a174-9fe3a9d7627f",
};
apiInstance
.getSLOReport(params)
.then((data: string) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"