테스트 시작 또는 일시 중지하기
PUT
https://api.datadoghq.com/api/v1/synthetics/tests/{public_id}/statushttps://api.us3.datadoghq.com/api/v1/synthetics/tests/{public_id}/statushttps://api.us5.datadoghq.com/api/v1/synthetics/tests/{public_id}/statushttps://api.datadoghq.eu/api/v1/synthetics/tests/{public_id}/statushttps://api.ap1.datadoghq.com/api/v1/synthetics/tests/{public_id}/statushttps://api.ap2.datadoghq.com/api/v1/synthetics/tests/{public_id}/statushttps://api.uk1.datadoghq.com/api/v1/synthetics/tests/{public_id}/statushttps://api.ddog-gov.com/api/v1/synthetics/tests/{public_id}/statushttps://api.us2.ddog-gov.com/api/v1/synthetics/tests/{public_id}/status개요
상태를 변경하여 Synthetic 테스트를 일시 중지하거나 시작합니다.
OAuth apps require the synthetics_write authorization scope to access this endpoint.
인수
경로 파라미터
이름
유형
설명
public_id [required]string
The public ID of the Synthetic test to update.
요청
Body Data (required)
지정된 Synthetic 테스트에 설정할 상태입니다.
항목
유형
설명
new_statusenum
기존 Synthetic 테스트를 시작하거나 일시 중지하기 위한 객체입니다.
Allowed enum values:
live, paused{
"new_status": "live"
}응답
OK - Returns a boolean indicating if the update was successful.
항목
유형
설명
boolean
{}JSON format is wrong.
Error response object.
항목
유형
설명
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Forbidden
Error response object.
항목
유형
설명
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}- Synthetic Monitoring is not activated for the user - Test is not owned by the user
Error response object.
항목
유형
설명
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}Too many requests
Error response object.
항목
유형
설명
errors [required][string]
Array of errors returned by the API.
{
"errors": [
"Bad Request"
]
}코드 예시
테스트 시작 또는 일시 중지하기
# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF# Path parameters
export public_id="CHANGE_ME"
# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X PUT "https://api.${DD_SITE}/api/v1/synthetics/tests/${public_id}/status" \
-H "Accept: application/json" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}" \
-d @- << EOF
{
"new_status": "live"
}
EOF테스트 시작 또는 일시 중지하기
// Pause or start a test returns "OK - Returns a boolean indicating if the update was successful." response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV1"
)
func main() {
body := datadogV1.SyntheticsUpdateTestPauseStatusPayload{
NewStatus: datadogV1.SYNTHETICSTESTPAUSESTATUS_LIVE.Ptr(),
}
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV1.NewSyntheticsApi(apiClient)
resp, r, err := api.UpdateTestPauseStatus(ctx, "public_id", body)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `SyntheticsApi.UpdateTestPauseStatus`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `SyntheticsApi.UpdateTestPauseStatus`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"테스트 시작 또는 일시 중지하기
// Pause or start a test returns "OK - Returns a boolean indicating if the update was successful."
// response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v1.api.SyntheticsApi;
import com.datadog.api.client.v1.model.SyntheticsTestPauseStatus;
import com.datadog.api.client.v1.model.SyntheticsUpdateTestPauseStatusPayload;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
SyntheticsApi apiInstance = new SyntheticsApi(defaultClient);
SyntheticsUpdateTestPauseStatusPayload body =
new SyntheticsUpdateTestPauseStatusPayload().newStatus(SyntheticsTestPauseStatus.LIVE);
try {
Boolean result = apiInstance.updateTestPauseStatus("public_id", body);
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling SyntheticsApi#updateTestPauseStatus");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"테스트 시작 또는 일시 중지하기
"""
Pause or start a test returns "OK - Returns a boolean indicating if the update was successful." response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v1.api.synthetics_api import SyntheticsApi
from datadog_api_client.v1.model.synthetics_test_pause_status import SyntheticsTestPauseStatus
from datadog_api_client.v1.model.synthetics_update_test_pause_status_payload import (
SyntheticsUpdateTestPauseStatusPayload,
)
body = SyntheticsUpdateTestPauseStatusPayload(
new_status=SyntheticsTestPauseStatus.LIVE,
)
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = SyntheticsApi(api_client)
response = api_instance.update_test_pause_status(public_id="public_id", body=body)
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"테스트 시작 또는 일시 중지하기
# Pause or start a test returns "OK - Returns a boolean indicating if the update was successful." response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V1::SyntheticsAPI.new
body = DatadogAPIClient::V1::SyntheticsUpdateTestPauseStatusPayload.new({
new_status: DatadogAPIClient::V1::SyntheticsTestPauseStatus::LIVE,
})
p api_instance.update_test_pause_status("public_id", body)
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"테스트 시작 또는 일시 중지하기
// Pause or start a test returns "OK - Returns a boolean indicating if the update
// was successful." response
use datadog_api_client::datadog;
use datadog_api_client::datadogV1::api_synthetics::SyntheticsAPI;
use datadog_api_client::datadogV1::model::SyntheticsTestPauseStatus;
use datadog_api_client::datadogV1::model::SyntheticsUpdateTestPauseStatusPayload;
#[tokio::main]
async fn main() {
let body =
SyntheticsUpdateTestPauseStatusPayload::new().new_status(SyntheticsTestPauseStatus::LIVE);
let configuration = datadog::Configuration::new();
let api = SyntheticsAPI::with_config(configuration);
let resp = api
.update_test_pause_status("public_id".to_string(), body)
.await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run테스트 시작 또는 일시 중지하기
/**
* Pause or start a test returns "OK - Returns a boolean indicating if the update was successful." response
*/
import { client, v1 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v1.SyntheticsApi(configuration);
const params: v1.SyntheticsApiUpdateTestPauseStatusRequest = {
body: {
newStatus: "live",
},
publicId: "public_id",
};
apiInstance
.updateTestPauseStatus(params)
.then((data: boolean) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"