현재 사용자 가져오기
https://api.datadoghq.com/api/v2/current_userhttps://api.us3.datadoghq.com/api/v2/current_userhttps://api.us5.datadoghq.com/api/v2/current_userhttps://api.datadoghq.eu/api/v2/current_userhttps://api.ap1.datadoghq.com/api/v2/current_userhttps://api.ap2.datadoghq.com/api/v2/current_userhttps://api.uk1.datadoghq.com/api/v2/current_userhttps://api.ddog-gov.com/api/v2/current_userhttps://api.us2.ddog-gov.com/api/v2/current_user개요
현재 인증 컨텍스트와 연결된 사용자를 가져옵니다. 응답에는 사용자의 프로필 속성(이름, 이메일, 핸들, 상태, MFA 상태)과 관련 리소스인 사용자의 조직, 부여된 권한이 있는 할당된 역할 및 팀 범위 역할이 포함됩니다. 유효한 인증 외에 추가 권한은 필요하지 않습니다.
응답
OK
Response containing information about a single user.
dataUser object returned by the API.
attributesAttributes of user object returned by the API.
created_atThe ISO 8601 timestamp of when the user account was created.
disabledWhether the user account is deactivated. Disabled users cannot log in.
emailThe email address of the user, used for login and notifications.
handleThe unique handle (username) of the user, typically matching their email prefix.
iconURL of the user's profile icon, typically a Gravatar URL derived from the email address.
last_login_timeThe ISO 8601 timestamp of the user's most recent login, or null if the user has never logged in.
mfa_enabledWhether multi-factor authentication (MFA) is enabled for the user's account.
modified_atThe ISO 8601 timestamp of when the user account was last modified.
nameThe full display name of the user as shown in the Datadog UI.
service_accountWhether this is a service account rather than a human user. Service accounts are used for programmatic API access.
statusThe current status of the user account (for example, Active, Pending, or Disabled).
titleThe job title of the user (for example, "Senior Engineer" or "Product Manager").
uuidThe globally unique identifier (UUID) of the user.
verifiedWhether the user's email address has been verified.
idID of the user.
relationshipsRelationships of the user object returned by the API.
orgRelationship to an organization.
data [required]Relationship to organization object.
id [required]ID of the organization.
type [required]Organizations resource type.
orgsorgsother_orgsRelationship to organizations.
data [required]Relationships to organization objects.
id [required]ID of the organization.
type [required]Organizations resource type.
orgsorgsother_usersRelationship to users.
data [required]Relationships to user objects.
id [required]A unique identifier that represents the user.
type [required]Users resource type.
usersusersrolesRelationship to roles.
dataAn array containing type and the unique identifier of a role.
idThe unique identifier of the role.
typeRoles type.
rolesrolestypeUsers resource type.
usersusersincludedArray of objects related to the user.
<type=orgs>Organization object.
attributesAttributes of the organization.
created_atCreation time of the organization.
descriptionDescription of the organization.
disabledWhether or not the organization is disabled.
modified_atTime of last organization modification.
nameName of the organization.
public_idPublic ID of the organization.
sharingSharing type of the organization.
urlURL of the site that this organization exists at.
idID of the organization.
type [required]Organizations resource type.
orgsorgs<type=permissions>Permission object.
attributesAttributes of a permission.
createdCreation time of the permission.
descriptionDescription of the permission.
display_nameDisplayed name for the permission.
display_typeDisplay type.
group_nameName of the permission group.
nameName of the permission.
name_aliasesList of alias names for the permission.
restrictedWhether or not the permission is restricted.
idID of the permission.
type [required]Permissions resource type.
permissionspermissions<type=roles>Role object returned by the API.
attributesAttributes of the role.
created_atCreation time of the role.
modified_atTime of last role modification.
nameThe name of the role. The name is neither unique nor a stable identifier of the role.
receives_permissions_fromThe managed role from which this role automatically inherits new permissions. Specify one of the following: "Datadog Admin Role", "Datadog Standard Role", or "Datadog Read Only Role". If empty or not specified, the role does not automatically inherit permissions from any managed role.
user_countNumber of users with that role.
idThe unique identifier of the role.
relationshipsRelationships of the role object returned by the API.
permissionsRelationship to multiple permissions objects.
dataRelationships to permission objects.
idID of the permission.
typePermissions resource type.
permissionspermissionstype [required]Roles type.
rolesroles{
"data": {
"attributes": {
"created_at": "2019-09-19T10:00:00.000Z",
"disabled": false,
"email": "string",
"handle": "string",
"icon": "string",
"last_login_time": "2019-09-19T10:00:00.000Z",
"mfa_enabled": false,
"modified_at": "2019-09-19T10:00:00.000Z",
"name": "string",
"service_account": false,
"status": "string",
"title": "string",
"uuid": "string",
"verified": false
},
"id": "string",
"relationships": {
"org": {
"data": {
"id": "00000000-0000-beef-0000-000000000000",
"type": "orgs"
}
},
"other_orgs": {
"data": [
{
"id": "00000000-0000-beef-0000-000000000000",
"type": "orgs"
}
]
},
"other_users": {
"data": [
{
"id": "00000000-0000-0000-2345-000000000000",
"type": "users"
}
]
},
"roles": {
"data": [
{
"id": "3653d3c6-0c75-11ea-ad28-fb5701eabc7d",
"type": "roles"
}
]
}
},
"type": "users"
},
"included": [
{
"attributes": {
"created_at": "2019-09-19T10:00:00.000Z",
"description": "string",
"disabled": false,
"modified_at": "2019-09-19T10:00:00.000Z",
"name": "string",
"public_id": "string",
"sharing": "string",
"url": "string"
},
"id": "string",
"type": "orgs"
}
]
}Authentication error
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}Too many requests
API error response.
errors [required]A list of errors.
{
"errors": [
"Bad Request"
]
}코드 예시
# Set your Datadog site and credentials
export DD_SITE="datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us3.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us5.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="datadoghq.eu"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ap1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ap2.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="uk1.datadoghq.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"# Set your Datadog site and credentials
export DD_SITE="us2.ddog-gov.com"
# Use a Personal Access Token or Service Access Token
export DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>"
curl -X GET "https://api.${DD_SITE}/api/v2/current_user" \
-H "Accept: application/json" \
-H "Authorization: Bearer ${DD_BEARER_TOKEN}"// Get current user returns "OK" response
package main
import (
"context"
"encoding/json"
"fmt"
"os"
"github.com/DataDog/datadog-api-client-go/v2/api/datadog"
"github.com/DataDog/datadog-api-client-go/v2/api/datadogV2"
)
func main() {
ctx := datadog.NewDefaultContext(context.Background())
ctx = context.WithValue(ctx, datadog.ContextAccessToken, os.Getenv("DD_BEARER_TOKEN"))
configuration := datadog.NewConfiguration()
apiClient := datadog.NewAPIClient(configuration)
api := datadogV2.NewUsersApi(apiClient)
resp, r, err := api.GetCurrentUser(ctx)
if err != nil {
fmt.Fprintf(os.Stderr, "Error when calling `UsersApi.GetCurrentUser`: %v\n", err)
fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
}
responseContent, _ := json.MarshalIndent(resp, "", " ")
fmt.Fprintf(os.Stdout, "Response from `UsersApi.GetCurrentUser`:\n%s\n", responseContent)
}
Instructions
First install the library and its dependencies and then save the example to main.go and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" go run "main.go"// Get current user returns "OK" response
import com.datadog.api.client.ApiClient;
import com.datadog.api.client.ApiException;
import com.datadog.api.client.v2.api.UsersApi;
import com.datadog.api.client.v2.model.UserResponse;
public class Example {
public static void main(String[] args) {
ApiClient defaultClient = ApiClient.getDefaultApiClient();
defaultClient.setAccessToken(System.getenv("DD_BEARER_TOKEN"));
UsersApi apiInstance = new UsersApi(defaultClient);
try {
UserResponse result = apiInstance.getCurrentUser();
System.out.println(result);
} catch (ApiException e) {
System.err.println("Exception when calling UsersApi#getCurrentUser");
System.err.println("Status code: " + e.getCode());
System.err.println("Reason: " + e.getResponseBody());
System.err.println("Response headers: " + e.getResponseHeaders());
e.printStackTrace();
}
}
}
Instructions
First install the library and its dependencies and then save the example to Example.java and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" java "Example.java""""
Get current user returns "OK" response
"""
from os import environ
from datadog_api_client import ApiClient, Configuration
from datadog_api_client.v2.api.users_api import UsersApi
configuration = Configuration()
configuration.access_token = environ["DD_BEARER_TOKEN"]
with ApiClient(configuration) as api_client:
api_instance = UsersApi(api_client)
response = api_instance.get_current_user()
print(response)
Instructions
First install the library and its dependencies and then save the example to example.py and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" python3 "example.py"# Get current user returns "OK" response
require "datadog_api_client"
DatadogAPIClient.configure do |config|
config.access_token = ENV["DD_BEARER_TOKEN"]
end
api_instance = DatadogAPIClient::V2::UsersAPI.new
p api_instance.get_current_user()
Instructions
First install the library and its dependencies and then save the example to example.rb and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" rb "example.rb"// Get current user returns "OK" response
use datadog_api_client::datadog;
use datadog_api_client::datadogV2::api_users::UsersAPI;
#[tokio::main]
async fn main() {
let configuration = datadog::Configuration::new();
let api = UsersAPI::with_config(configuration);
let resp = api.get_current_user().await;
if let Ok(value) = resp {
println!("{:#?}", value);
} else {
println!("{:#?}", resp.unwrap_err());
}
}
Instructions
First install the library and its dependencies and then save the example to src/main.rs and run following commands:
DD_SITE="datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us3.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us5.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="datadoghq.eu" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ap2.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="uk1.datadoghq.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo runDD_SITE="us2.ddog-gov.com" DD_API_KEY="<DD_API_KEY>" DD_APP_KEY="<DD_APP_KEY>" cargo run/**
* Get current user returns "OK" response
*/
import { client, v2 } from "@datadog/datadog-api-client";
const configuration = client.createConfiguration({
authMethods: {
AuthZ: {
accessToken: process.env.DD_BEARER_TOKEN as string,
},
},
});
const apiInstance = new v2.UsersApi(configuration);
apiInstance
.getCurrentUser()
.then((data: v2.UserResponse) => {
console.log(
"API called successfully. Returned data: " + JSON.stringify(data)
);
})
.catch((error: any) => console.error(error));
Instructions
First install the library and its dependencies and then save the example to example.ts and run following commands:
DD_SITE="datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us3.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us5.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="datadoghq.eu" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ap2.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="uk1.datadoghq.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"DD_SITE="us2.ddog-gov.com" DD_BEARER_TOKEN="<PERSONAL_ACCESS_TOKEN OR SERVICE_ACCESS_TOKEN>" tsc "example.ts"